Product Description

YSD 1800 ROCK PIPE JACKING MACHINE PARAMETER

 

 

Product Description

Pipe Jacking Machine 2000mm designed for large pipe jacking engineering , generally used in the construction of cement pipe crossings, building houses translation, sewers, roads and rivers as a sheathing of other projects across a variety of channels.

Principle
Pipe jacking construction is in the work in the pit ,by means of jacking Machine which produce jacking force, and overcome the friction between the pipes and the surrounding soil.
Jacking the pipes Into the soil at the design slope.and Removed soils .
After a section of pipe finish jacking into the soil , then the second section of the pipes continue to jack into the soil , The principle is by means of the thrust of the main cylinder    pipeline, intermediate jacking station,and other thrust pushing the tool pipe or heading machine (through the soil )from working well to the receiving well and Lift up. Then , embed the pipes between the 2 wells.

 

Main Features:
Whole Section rock earth pressure display system.
The separated single grouting system for cutter panel and spindle center.
The rear of jacking pipe machine equipped with jacking device and prevent deviation device.
Disk cutter adopts famous China brand.
Planetary gearbox adopts Italian BREVINI.
Adopt touch screen, PLC Inverter and other advanced control system.
The data displayed on the touch screen can be connected to users  office monitor through RS232 interface.

Advantage
The advantage of this technique is no excavation on the ground,Do not demolition,Does not destroy the ground buildings;Don’t damage the environment,Does not affect pipeline segment deformation,Time-saving, efficient, safe, low overall cost.
The technology are widely used in urban underground water supply and drainage pipeline,Natural gas pipeline,Communication cable and other non excavation laying.It can through the highway, railway, bridge, mountains, rivers, channel and any building on the ground.The use of the technology construction, can save a large amount of land acquisition and demolition costs,also can reduce environmental pollution and road congestion,It has significant economic and social benefits.

Working frequency
1.Using in ROCK condition
2.Widely used in Southeast Asian countries, ZheJiang , and Japan.
3.Inside cement pipe dia from 1000-3200 mm
4.Professional manufacturer who can produce ROCK pipe jacking machine in China.
 
Packaging & Shipping
Nude Packing
Delivery Detail:
60 days after 30% deposit receiving
 
Our Services
 We will send professional technician to your project site to operate the pipe jacking machine and train operators for the project,  
1.On site service support;
2. 12month warranty;
3.Life time service support,
 
5. 7 days*24hours Hot-line & Email Service. 
6.Your inquiry related to our pipe jacking machine will be replied within 24 hours.Well-trained and experienced staff will answer all your questions in fluent English.
 
 Warranty
If quality & assembling problem caused troubles, we take responsible on spare parts and all service fees.
If misuse or human factors caused the trouble, users shall take responsible on spare parts and all service fees.
 
Company Information
ZheJiang Xuanxuan Heavy Machinery Co.Ltd is affiliated with Weiqiang Group.It’s located in HangZhou city,ZheJiang Province,is located in the center of the Yangtze River Delta,the north part close to Yangtze River, the south part close to Lake Xihu (West Lake) Dis., and East part is close to the East China Sea.Is the birthplace of modern Chinese industrial, modern equipment manufacturing city. It Has a superior geographical advantage and convenient land and sea and airtransportation conditions.
WeiQiang group was founded in 1989,More than 30 years of history, now,It Consists of several companies,such as  Weiqiang Chemical, Weiqiang machinery,  XuanXuan heavy Machinery , it was assessed as “private technology enterprises in HangZhou City”,”High-tech enterprises in ZheJiang Province ” Private science and technology enterprises in ZheJiang province “.
ZheJiang Xuan Xuan Heavy Machinery Co., Ltd. professional design and manufacture trenchless engineering equipment,integrate Product development, manufacturing, marketing and after-sales service .Products include multi-series pipe jacking machine, shield machine, pipe jacking equipment and spare parts spare parts.
Products include multi-series pipe jacking machine, shield machine, spare parts of pipe jacking machine, shield machine,Hydraulic oil cylinder, hydraulic system, lubricating system, pneumatic system, PLC control system and non-standard equipment.The company attaches great importance to the development of new technology and new products.In recent years, In recent years, vigorously invested in the non-excavation pipe jacking equipment, hydraulic systems, and had done a lot of fruitful work.It has successfully developed a slurry balance, earth pressure balance and series of multi-type excavation products,It has been  successful application in domestic market,  
The company attaches great importance to product quality management, and establish a standardized and systematic quality management platform, strict requirements, excellence, our goal is to provide customers with high-quality engineering equipment.  Company will provide high-quality pre-sale, sale, after-sales service,Companies to provide high-quality pre-sale, sale, after-sales service, At any time, provide product consulting,   use  guidance, etc.
Adhering to the service purposes of “active”, professional specialization, efficiency first ” we aim to provide quality products and excellent service to our customers. To achieve the expectations of customers and exceed goals of Industry standard. 
Xuan Xuan heavy industry based on long-term development strategy, follow the “conservation, security, service,” the 3S product concept, and vigorously promote scientific and technological innovation, continuing to provide customers with quality products and services. 
FAQ
In order for you to get a better price and technical solutions. Please provide the following required parameters:
1. Project total length, distance for 1 section, how many sections will be built? 
2 Pipe type: concrete or steel etc, single length of the pipe? outer and inner diameter ? 
 3 Projects information: for water supply, sewage project? 
 4 Underground water level; 
 5 Soil type? soil report is needed.

 

Axle Spindle Types and Features

The axle spindle is an integral part of your vehicle’s suspension. There are several different types and features, including mounting methods, bearings, and functions. Read on for some basic information on axle spindles. The next part of the article will cover how to choose the correct axle spindle for your vehicle. This article will also discuss the different types of spindles available, including the differences between the rear and front bearings.

Features

The improved axle spindle nut assembly is capable of providing additional performance benefits, including increased tire life and reduced seal failure. Its keyway features and radially inwardly extending teeth allow nut adjustment to be accomplished with precision. The invention further provides a unique, multi-piece locking mechanism that minimizes leakage and torque transfer. Its principles and features are detailed in the appended claims. For example, the improved axle spindle nut assembly is designed for use in vehicles that are equipped with a steering system.
The axle spindle nut assembly includes a nut 252 with threads 256 on its inner periphery. The axle spindle 50 also features threads 198 on its outer periphery. The nut is threaded onto the outboard end of the axle spindle 50 until it contacts the inboard surface of the axle spacer 26. In the assembled state, a bearing spacer 58 is also present on the axle spindle.
The axle spindle nut assembly can reduce axial end play between the wheel end assembly 52 and the axle spindle 50. It can be tightened to an extreme torque level, but if the thread faces separate, it will undercompress the bearing cone and spacer group. To minimize these disadvantages, the axle spindle nut assembly is a critical component of a wheel-end assembly. There are several types of axle spindle nuts.
The third embodiment of the axle spindle nut assembly 300 comprises an inner washer 202, an outer washer 310, and at least 1 screw 320. The axle spindle nut assembly 300 secures and preloads bearing cones 55, 57. Unlike the first embodiment, the axle spindle nut assembly 300 uses the inner washer 202, which is optional in the third embodiment. The inner washer 202 and outer washer 310 are similar to those of the first embodiment.

Functions

An axle spindle is 1 of the most important components of a vehicle’s suspension system. The spindle retains the position of bearings and a spacer in an axle by providing clamp force. The inner nut of an axle spindle should be properly torqued to ensure a secure fit. A spindle nut is also responsible for compressing bearings and spacers. If any of these components are missing, the spindle will not work properly.
An axle spindle is used in rear wheel drive cars. It carries the weight of the vehicle on the axle casing and transfers the torque from the differential to the wheels. The axle spindle and hub are secured on the spindle by large nuts. The axle spindle is a vital component of rear wheel drive vehicles. Hence, it is essential to understand the functions of axle spindle. These components are responsible for the smooth operation of a vehicle’s suspension system.
Axle spindles can be mounted in 3 ways: in the typical axle assembly, the spindles are bolted onto the ends of the tubular axle, and the axle is suspended by springs. Short stub-axle mounting uses a torsion beam that flexes to provide a smooth ride. A second washer is used to prevent excessive rotation of the axle spindle.
Apart from being a crucial component of the suspension system, the spindles of the wheels are responsible for guiding the vehicle in a straight line. They are connected to the steering axis and are used in different types of suspension systems. European cars use a MacPherson Strut suspension system in which the spindle is connected to the arms in the front and rear of the suspension frame. The MacPherson strut allows the shock absorber housing to turn the wheel.

Methods of mounting

Various methods of mounting axle spindle are available. In general, these methods involve forming a tubular blank of uniform cross section and thickness, and receiving the bearing assembly against it. The spindle is then secured using a collar, which also serves as a bearing stop. In some cases, additional features are used to provide greater security. Some of these features may not be suitable for all applications. But they are generally suitable.
Axle spindle forming is usually done by progressive steps using hollow punches. The metallic body of the punch has an inner work surface, which receives the axle blank. A mandrel is fixed within the work opening of the punch. The punch body’s work surface forges the spindle about the mandrel. The punch has 2 ends, a closed and an open one.
A wheeled vehicle axle assembly (10) includes a cylindrical housing member (12 a) and a plurality of spindle mounting flanges (30) secured on the housing member. The spindles (16) are firmly attached to the housing member by means of coupling members. The coupling members are configured to distribute the bending loads imposed on the spindle by the axle. It is important to note that the coupling members can be either threaded or screwed.
Traditionally, axle spindles were made from tubular blanks of irregular thickness. This method allowed for a gradual reduction in diameter and eliminated the need for extra metal within the spindle. Similarly, axles made by cold forming eliminate the need for additional metal in the spindle. In this way, the overall cost of manufacture is also reduced. The material used for manufacturing axles also determines the size and shape of the final product.

Bearings

A nut 16 is used to retain the wheel bearings on axle spindle 12. The nut comprises several parts. The first portion includes a plurality of threads and a deformable second portion. The nut may be disposed on the inboard or outboard end of the axle spindle. This type of nut is typically secured to the axle spindle by a retaining nut.
The bearings are installed in the spindle to allow the wheel hub to rotate. While bearings are greased, they can dry out over time. Consequently, you may hear a loud clicking sound when turning your vehicle. Alternatively, you may notice grease on the edges of your tires. Bearing failure can cause severe damage to your axle spindle. If you notice any of these symptoms, you may need to replace the bearings on your axle spindle. Fortunately, you can purchase the necessary bearing parts at O’Reilly Auto Parts.
There are 3 ways to mount an axle spindle. A typical axle assembly has the spindles bolted to the ends of the tubular axle. A torsion beam is also used to mount the spindles on the axle. This torsion beam acts like a spring to help make the ride smooth and bump-free. Lastly, the axle spindle is sometimes mounted as a bolt-on component.

Cost

If your axle spindle has been damaged, you may need to have it replaced. This part of the axle is relatively easy to replace, but you need to know how to do it correctly. To replace your axle spindle, you must first remove the damaged one. To do this, a technician will cut the weld. They will then thread the new 1 into the axle tube and torque it to specification. After that, they will weld the new axle spindle into place.
When you are thinking about the cost of an axle spindle replacement, you must first determine if it is worth it for your vehicle. It is generally a good idea to replace the spindle only if it is causing damage to your vehicle. You can also replace your axle housing if it is deteriorating. If you do not replace the spindle, you can risk damaging the axle housing. To save money, you can consider using a repair kit.
You can also purchase an axle nut socket set. Most wrenches have an adjusting socket for this purpose. The socket set should be suitable for most vehicle types. Axle spindle replacement costs around $500 to $600 before tax. However, you should be aware that these costs vary widely based on the type of vehicle you have. The parts can cost between $430 and $480, and the labor can cost anywhere from $50 to 70.