Product Description

OUTDOOR LED SCREENS
Superior quality LED displays by FWS Led
All Sizes and Resolutions Available
Weatherproof: Made to Withstand Rain, Snow, and Any Weather
Customizable: We Can Create Any Size and Configuration
LED Rental Cabinet
Picture for 500 x 500 and 500 x 1000 Cabinet

Memorize Parameters including Brightness, Chroma Fixation Figures, and Module Parameters when power is cut.

  
     LED DISPLAYS MANUFACTURING FWS Led designs customized LED advertising screens for each project and client, so they are customized screens.    
   

 

	Parameters	P2.976	P3.91	P4.81
Technical parameter
	Pixel Pitch	2.976mm	3.91mm	4.81mm
	Module Definition	84W x 84H	64W×64H = 4096	52W× 52H = 2074
	Cabinet Pixel Density	112896 Pixel/m^2	65536 Pixel/m2	43264 Pixel/m2
	Driver Type	1/ 21 Scans	1/ 32 Scans	1/ 32 Scans
	Pixel Structrue	SMD1921 3 in 1 LED
	Module Size	250mm × 250mm
	Module Weight	0.65KG
	Module Maximun Power Dissipation	≤42W
	Average Power Dissipation	450 W/sqm
	Refresh Rate	>1920HZ
	Waterproof Rating	IP 65
	Brightness	≥3500-4500

 
Pre-Sales Service
1) Your inquiry related to our products or price will be replied to in 24 hours.
2) Well-trained and experienced staff to answer all your inquiries in fluent English.
3) OEM&ODM, any your customized screen we can help you to design and put into product.
4) Distributorships are offered for your unique design and some of our current models.
5) Protection of your sales area, ideas of design, and all your private information.

After-Sales Service
1. Free training: 
You can send your engineers who know electronics and information to our factory and we provide free technical training, which contains training operation and maintenance of the LED display at our factory. We also offer the instruction manual, software, test report, drawing steel structure, and so on. 
2. Installation: 
We can offer you an engineer to install the LED display, but you have to offer him two-way air tickets and accommodation, and a visa. The engineer’s salary is $80/day, or we can CZPT you to install the screen by team-viewer remote control. 
3. After-Sales Service;
If you have any questions about our product, you can inform us by mail or call, and we will reply to you in 24 hours, and offer you a good solution for your problem.

Packaging

Trade Terms
1)  Payment: T/T, usually 50% prepayment before production,
     50% balance to be paid before delivery, it also changes according to the total  quantity
2)  50% of the total price must be paid before production as a down payment. (T/T)
     The other 50% must reach the seller’s accounts on the delivery date, or the seller will hold the products. (T/T)
3)  Sample can be delivered in 10 days
4)  Shipping port: HangZhou, Mainland China
5)  Discounts are offered based on order quantities.

About Us

  Our company is named HangZhou FWS Technology Co., Ltd. was established in May 2008. It’s a high-tech enterprise which is specialized in researching, designing, manufacturing, and exporting all kinds of led displays. With qualified talents, high technology, and abundant funds, we have many offices and branches in most cities of China, so we can offer fast and perfect service to our clients.

              Our Company has a high-quality
experienced technicians and advanced modern production equipment; CZPT machine, injection molding machine, COB machine, high-temperature aging furnace, TABLE machine (point-by-point brightness debug) reflow soldering machine and several wave soldering machines, PCBA lines, automatic packaging production lines and 3,000sqm aging vertical testing stand. Fully implement strict ISO9001-2000 quality management, and strive to make every piece of LED displays, LED unit boards, modules, lighting to be the best, our products have passed the European CE, American UL certification and other related certifications.
 

Certificates

Our Clients

 

FAQ;
_____________________________________________________________________________________________

Q1; How do you ship the goods and how long does it take to arrive?
A: We mostly accept FOB train terms, but we can help you order and arrange a shipping agent.
It usually takes 20-30 days on the sea. a few days for customs clearance.

Q2; Is it OK to print my logo on the products?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q3; Are you a manufacturer or trading company?
A: We are a professional OEM/ODM manufacturer specializing in the LED Display industry for more than 11 years.

Q4; How does your factory do regarding quality control?
A; Quality is a priority. Brighter people always attach great importance to quality control from the very beginning to the very end.
    We focus on every detail, Our factory has gained ISO9001, ISO14001, CE, RoHS, and FCC authentication.

Q5; Do you provide any free spare parts in each order?
A; Yes, a certain amount of spare parts will be provided for free, spare parts including modules,
    power cable, signal cable, LED lamp, IC, mask, power supply, receiving card, etc.

Q6; How about your Warranty Term?
A: 3-year warranty. Structure design, installation problem, program the screen, how to use the screen…don’t worry, we have a professional after-sale team to solve any questions after you placed an order. And your exclusive sales engineer will also help you get over any problems.

Q7; What is your best service?
A: One to 1 sales engineer to customer responsibility system. We will do:
1. Know your project and provide the best solution for it;
2. Track your order and let you know each step and detail of it;
3. Teach you how to install and use the screen;
4. Care about the subsequent use of your screen and ensure your after-sales service is well.

 

Screw Shaft Types

If you’re looking for a screw shaft, but aren’t sure which type to buy, you’re in luck. In this article, we’ll talk about the different types, including Threaded shank, Round head, and Machined. Once you’ve read it, you’ll know which type to buy. Then, you can decide whether you want a ball screw nut or a threaded shank.

Machined screw shafts

Besides the standard stainless steel shaft, manufacturers also provide a variety of other materials, such as titanium, bronze, and brass. In addition to stainless steel, manufacturers also provide a variety of top-coating options, including zinc, brass, and chromium. Aluminum screws are not particularly durable and are easily affected by weather. Most screw shafts feature self-locking mechanisms. They are especially useful in C-clamps, vises, and screw-top container lids.
For applications where accuracy is vital, a ball screw shaft needs to be annealed. A heat treatment can be performed on the ball screw shaft to ensure that both ends are heated evenly. In this process, the shaft will be more durable, while maintaining its high-precision properties. These screw shafts are a key component in computer-controlled motion-control systems, wire bonding, and other industries that require high-precision and high-quality performance.
Depending on the material used, screw shafts can be made of stainless steel or titanium. High-precision CNC machines and lathes are typically used to manufacture screw shafts. Various shapes and sizes are available, each with a specific application. Whether you need a small or large screw, you can find 1 to fit your needs. And since each size requires a different material, your choice of material is important as well.
In general, the materials used for machining screw shafts are steel, stainless steel, titanium, brass, bronze, and aluminum. Metals that resist corrosion are also commonly used. Other materials for screw shafts are Teflon, nylon, and nylon. You can also find threaded screw shafts in materials such as porcelain, glass, and ceramic. If you want to use your screws in a unique material, consider purchasing a customized one.

Ball screw nuts

If you have a screw shaft, the last thing you want to worry about is the ball nut slipping off. To prevent this, you can place a temporary stop in the shaft’s grooves to ensure that the ball nut does not slide off. When you remove the stop, you can then install the ball screw nut. But, before you can install the ball screw nut, you have to make sure that you have a good grip on the shaft.
When selecting ball screw nuts, it’s important to consider how much preload you need to apply to avoid excessive backlash. Preloading eliminates this problem by making the ball nut compact. It also prevents backlash, which is lost motion caused by clearance between the ball and nut. Backlash disrupts repeatability and accuracy. This is where spacer preloading comes in. You can insert a spacer between the 2 ball nuts to transmit the force to the nut. However, you should keep in mind that this method reduces the load capacity of the ball screw.
The critical speed of a screw is the maximum rotating speed before it whips. This critical speed is influenced by several factors, including the diameter of the screw shaft, the number of support elements, and the material. By adjusting these factors, you can reduce the number of components used and the amount of time it takes to assemble the screw shaft. In addition, you can also reduce the number of components and avoid stacking tolerances. However, the critical speed of plastic nuts is limited due to sliding friction.
The ball screw nut has several characteristics that make it unique. Its most prominent feature is the presence of ball bearings. These balls help reduce friction between the screw nut and the shaft. Without ball bearings, the friction would be too high to function properly. Another important characteristic is the groove profile of the nut and ball. These 2 features ensure that the ball and the nut meet at 2 points. You’ll be amazed by the results of the work of these ball screw nuts.

Threaded shank

Wood screws are usually not fully threaded because the shank has an unthreaded portion at the top. This shoulder part forces the screw to compress 2 pieces of wood, which prevents the screw from overheating and compromising the materials strength. As the screw is threaded partially up, it is not as difficult to remove as a fully threaded screw. However, it is important to note that a wood screw will not hold as tightly as 1 with a fully threaded shank.
In addition to being universal, screw threads can be of different sizes. For example, a M8 screw has a thread pitch of 1.25 mm. To avoid confusion, screw thread pitches are commonly given with a multiplication sign. For example, M8x1 means that the screw is 8 mm in diameter but has a thread pitch of 1 mm per 360-degree rotation. Those who are not familiar with these dimensions may find it confusing.
The OD of the threaded portion of a bolt is generally smaller than the OD of the nut. If the shank is too deep for the nut to fit, the threads may bottom out. This is why it’s important to use a thread-cutting bit with a small thread diameter. You can use a micrometer or caliper to measure the thread diameter. This tool will also allow you to easily identify which screw size fits where and how well.
The metric system is the most widely used. Fasteners with DIN numbers are generally metric in size. This makes them very useful for industrial settings. You can find metric-sized screws anywhere, as long as you buy them from a reputable manufacturer. These fasteners also come with a dog point, which is used for safety wire. If the screw needs to be replaced, the shank can be drilled with a hole for a safety wire or for a dog-point.

Round head

A round head screw is the most common type used for machine screws. Other common types include truss head, flat head, and hexed head. Each has a different profile and are used for different purposes. A round head screw is typically wider than a flat or a hexed head, and has a slightly rounded surface. These screws are useful for projects involving sheet metal or sheet-metal parts. Round heads are usually slightly wider than a hex head screw, and they may also be used as a substitute for washers in certain applications. However, truss heads are not necessary for every project.
A wood screw has a smooth shank that protrudes above the surface of the material it is attaching. A metal screw has a threaded shaft that is fully threaded from head to point, and a fully threaded shaft provides more bite. Two common head styles are round head and pan head. If the task requires the screw to be flush or countersunk, the round head will be the best choice.
Another type is the Reed & Prince screw drive. These are similar to Phillips screws but have a 75-degree V shape. They are commonly used in marine hardware and are also known as BNAE NFL22-070. This type is also used for steel plate hangers. In addition to round head and pan head screws, there are a variety of other screw types. You can even get a head with a slotted head if you know where to look.
Screw diameters are specified according to the ISO 261 or ISO 262 standards. An M8 screw has a diameter of 8.25 mm. The M8 screw has a pitch of 1.25 mm, which is equivalent to 1 mm per 360 degrees. There are several other standard screw sizes and thread diameters available. You can find them all by consulting the relevant standards. But remember, the metric system is the most popular.

Self-locking mechanism

A self-locking mechanism for a screw shaft is a device that secures the screw to its supporting member in a failure position. The locking mechanism provides a positive connection between the screw shaft and the control surface during normal operation, and locks the screw to its supporting member when the screw fails. Previous attempts to solve this problem have typically used secondary nuts with free play on the screw, which were intentionally designed to jam when loaded. However, such a device can be unreliable, which is why the present invention offers a more robust and reliable locking mechanism.
The self-locking function of a screw depends on several factors, including its pitch angle and the coefficient of friction of the threads. The angle of friction must be less than the tangent of the material pairing to prevent untightening of the screw. Screws with self-locking mechanisms have an efficiency e lower than 50%, which is less than half. Self-locking screws also have the benefit of being less efficient than a standard screw.
Unlike a normal screw, a self-locking screw can be turned in either direction. The nut 22 rotates with the screw shaft, and the member 23 is translated in an axial direction. Regardless of the direction of the rotation of the screw, this axial translation will result in the opposite moment to that input moment. While screw self-locking mechanisms are typically less expensive, they are more reliable and durable.
Another important feature of self-locking screws is that they are not susceptible to independent loosening. The screw cannot rotate without a certain amount of torque. In addition, a self-locking screw shaft must have a small wedge with a smaller half-angle than the arctangent of the static friction. This means that the torque applied by the driver must be greater than the torque needed to overcome the friction.