Product Description

Products Description

It is suitable for high quality welding of circuit board, LED lamp welding, connector, RJ/ network transformer, wiring, FPCB drawing welding, COF drawing welding, computer motherboard, terminal soldering, motor and so on.

Features

1. Perfect solder process setting, which can realize spot welding, pull welding, side point and other similar manual solder actions. Each instruction has independent preheating length, preheating time, welding time, tin return time, lifting height and other solder parameters.

2. Strong flexibility, standard universal fixture suitable for the use of multiple products, double platform single welding head design, can install the product while soldering is more time saving, can be applied to the mass production of multi-angle solder joint products,

3. Equipped with broken tin feeding device, it can automatically break tin and block tin alarm function, reduce the splashing of tin beads, and improve the solder quality.

4.200W temperature control system, accurate temperature, fast temperature return, ensure welding quality.

5. Adopt five-axis motion control system to accurately locate welding spots

 

Machine size (L*W*H)	700*750*650mm
Effective stroke (X*Y*Z)	500*430*150mm
Number of platform	1-2 shaft jobs
Drive way	5 axis precision step drive
Positioning accuracy	±0.02mm
Positioning accuracy R axis	±0.05°
guide	Import slide rail, screw rod
Control system	PLC + touch screen control system
Program storage	256 sets, 400 points per set
Used tin line	Φ0.3mm-Φ2.0mm
Send tin way	Edit multi – stage tin feed
Temperature control system	Pulse high frequency eddy current constant temperature heating
Temperature control power	150W / 320W
Communications port	USB, support multi – machine program copy interoperability
The power supply	220VAC,50HZ
Air supply	0.3Mpa
The weight	40kg

Company Profile

HangZhou XinHangCheng Automation Equipment Co. LTD.It is headquartered in ZheJiang Province, China.It mainly sells automatic spraying oil machine/automatic soldering machine/automatic screw locking machine/automatic double-sided adhesive tape machine and other non-standard automation equipment, etc., and has been unanimously recognized by users in the field of automation solution provision.In the past few years, actively expand the market.The good atmosphere of the enterprise attracts a large number of outstanding talents, and the gathering of outstanding talents makes the high-quality company become a highly cooperative professional team.XinHangCheng automation equipment has the advantages of saving manpower, improving production efficiency, stabilizing product quality, applicability and timely service.

Certificates

Figure 1: A utility model patent certificate for screw locking machine

Figure 2: Utility model patent of magnetic absorption batch device of automatic screw locking machine

FIG. 3: A patent for the appearance design of a screw locking machine

Exhibition

FAQ

Q:Are you a manufacture?A:Yes, We are manufacture, all machines is ourself design and manufacture, we can provide customize service according to your requirement.

Q:Where is your factory? Can I visit your factory?A:Our factory is located on HangZhou which near HangZhou and HangZhou. We are warmly welcome you to visit our factory, we can pick you up when you come to HangZhou or HangZhou airport or Humen fast train station.
Q:How to buy your machine?
A:Please send me inquiry from my alibaba website, after confirm with machine model and price, we will sign a PI to confirm our order, when we get your first deposit start manfuacture machine, when we got your full payment arrange packing and shipping to you..
Q:What about your warranty?
A:Our warranty is 1 years, and full life technology service.
Q:How long we will get the machine?
A: Delivery time up machine machine model, standard machine normally can shipping out within 10days, special machine up to our PI confirmed delivery date. And after shipping you just need wait the ship container arrived to you.
Q:Are we still need to install the machine after we got?
A:All of machine already testing ready, and all parameter is setted ok before we deliver to you, also we can send you video and manual to teach you how to use the machine.
Q:How can you guarantee we receive a good quality?
A:First, we have seriesly inspection process department to control the quality. When the machine was finished,we should send you the inspection video and pictures. You can come to our factory to check and inspect the machine with your sample raw material.

To our friend:
To give you the best service, we need your full products information(products drawing diagrams, material, welding size, working-efficiency required tec), If you have any question about our products, please feel free cont.

Payment: 30% of the total price was paid in advance at (T/T)

After that, after you check the complete machine, the remaining 70% should be paid before (T/T).At all payments

Upon arrival at our account, the goods will be delivered.

Delivery time: 50 days after confirmation of order

Warranty period: 1 year

Packing: Wooden packing

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from 1 side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are 2 types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at 1 end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are 2 types of lug structures: 1 is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.