Product Description

Warning:

This product is design for adult.Not a children’s toy

Due to its design and speed and being covered by the CE regulations.

All powered vehicles are potentially dangerous and their use could involve the risk of injury or death, and they must be used in responsible manner. All nuts and bolts, tyre pressure and seating should be checked by a competent adult before every use. Accident damage should be attended to immediately and damaged parts replaced.

Helmets and suitable protective safety equipment should be used at all times.

Your product will arrive in a carton which contains a leaflet setting out the above warning notice, which you are strongly advised to read to the letter.

Shipping:

All our products are usually dispatch within 35 working days of receiving clear payment.

For most orders, we offer free delivery to the port

Payment:

We accept payment by any of the following methods: western union or TT

Please pay as soon as possible after buying the item, as that will allow us to post your item to you sooner!

BUY NOW!

Returns:

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.

You can return a product for up to 14 days from the date you purchased it.

Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

You are responsible for return postage costs.

Disclaimer

Warning: It is illegal to ride electric scooters on public roads, pavements, or cycle paths. They are intended only for use on private land with the owner’s permission.

ENGINES 38 hp, Rotax 427 cc single cylinder, liquid-cooled

Fuel Delivery System:Electronic Fuel Injection (EFI)

Transmission :CVT, P/R/N/H/L, standard engine braking

Drive Train :Selectable 2WD/4WD

SUSPENSIONS

Front Suspension :Double A-arm 9 in. (22.9 cm) travel

Front Shocks :Oil

Rear Suspension :Torsional Trailing arm Independent (TTI) 8.8 in. (22.4 cm) travel

Rear Shocks :Oil

TIRES & WHEELS

Front Tires :Carlisle Trail CZPT 25 x 8 x 12 in.

Rear Tires :Carlisle Trail CZPT 25 x 10 x 12 in.

Wheels :12 in. steel

BRAKES

Front :Dual 214 mm disc brakes with hydraulic twin-piston calipers

Rear :Single 214 mm disc brake with hydraulic twin-piston caliper

DIMENSIONS & CAPACITIES

Estimated Dry Weight* :678 lb (308 kg)

L x W x H :83 x 46 x 49 in. (211 x 116.8 x 124 cm)

Wheelbase :51 in. (129.5 cm)

Ground Clearance :10.5 in. (26.7 cm)

Seat Height :33.8 in. (85.8 cm)

Rack Capacity :Front: 120 lb (54.4 kg)/Rear: 240 lb (109 kg)

Storage Capacity :Rear: 2.9 gal (10.9 L)

Towing Capacity :1,300 lb (590 kg)

Fuel Capacity :5.4 gal (20.5 L)

FEATURES

Gauge :Multifunction digital: speedometer, tachometer, odometer, trip and hour meters, fuel, gear position, 4 x 4 indicator, diagnostics, clock

Instrumentation :Lighter-type DC outlet in console, standard connector in the back (15 A)

Lighting:70 W from dual 35 W front light/brake light

Winch :Prewired for available winch

Seat :Standard

Company Information
HangZhou Biying industry and Trade Co., Ltd was established in year 2015 as a high quality All Terrain Vehicle manufacture, Electric scooter, motorcycle, It is located in the hardware town of HangZhou City, ZHangZhoug Province, we enjoy convenient water, , land and air transportation. Integrates development and manufacturing in-house, Specializes in manufacturing ATV, UTV, Electric scooter, motorcycle, Buggy all types of off road vehicle, , The engine displacement from 49CC to 1000cc. Currently, DW product already exported to America, Australia, UAE, Mexico and 10 other countries. We have our own Management system and E/E-MARK certificate. We also follow the CZPT of marketing and provide customers with the latest design product information that we master through our many years’ experience in this industry. We welcome overseas customers to contact us get more details.

Our company promises: Reasonable prices, short production time and satisfactory after-sales service. HangZhou Biying industry and Trade Co., Ltd people have continuously tried to improve product quality, We aim to give full satisfaction to all our customers.

       

FAQ:

1.What’s the mini order?

The minimum order is a 20ft container, with 3 different models can be mixed.

2.How long is the delivery time?

It will take from 18 days to 45 days depends on the model and quantity.

3.Can I order spare parts?

We have all the parts list available for our models,

4.How about warranty ?

We offer 6 months warranty for 2 stroke engine and frame.Offer 12 months warranty for 4 stroke engine and frame.

5.How about the shipping ?

We can arrange to ship the container or you may have the forwarder.

6.Is sample available?

Yes, sample order is acceptable, there will be extra cost

7.What certificate do you have for ATV quad and dirt bike and ect?

Our factory has ISO9001 , WMI

a.All ATV and and Dirt bike are CE available.

b.110cc 125cc 49cc ATV with EPA approved.

c. EN15194 is available for each Electric bike.

8. Could i use my own LOGO or design on goods?

Yes. When you have a big quantity mass production order,we can use your own LOGO or your language manual, and etc,

9. Could I get a discounted price?

Yes, if you have a great qty of order, we would give a discount.

10.Does company accept EURO ?

Yes. We also have EURO account, not only USD.

11.What is the payment ?

We have some kinds of payment. Such as TT, LC, West Union

12.Did you attend in any aboard exhibition?

We went to Germany, Italy, South America, ZheJiang , Hongkong to show goods in last 2 years.

13. Did you export goods to EU/South America/USA ect ?

We have distributor from 35 countries in the world.If you need more details, please freely to contact with me.
 

Driveshaft structure and vibrations associated with it

The structure of the drive shaft is critical to its efficiency and reliability. Drive shafts typically contain claw couplings, rag joints and universal joints. Other drive shafts have prismatic or splined joints. Learn about the different types of drive shafts and how they work. If you want to know the vibrations associated with them, read on. But first, let’s define what a driveshaft is.

transmission shaft

As the demand on our vehicles continues to increase, so does the demand on our drive systems. Higher CO2 emission standards and stricter emission standards increase the stress on the drive system while improving comfort and shortening the turning radius. These and other negative effects can place significant stress and wear on components, which can lead to driveshaft failure and increase vehicle safety risks. Therefore, the drive shaft must be inspected and replaced regularly.
Depending on your model, you may only need to replace 1 driveshaft. However, the cost to replace both driveshafts ranges from $650 to $1850. Additionally, you may incur labor costs ranging from $140 to $250. The labor price will depend on your car model and its drivetrain type. In general, however, the cost of replacing a driveshaft ranges from $470 to $1850.
Regionally, the automotive driveshaft market can be divided into 4 major markets: North America, Europe, Asia Pacific, and Rest of the World. North America is expected to dominate the market, while Europe and Asia Pacific are expected to grow the fastest. Furthermore, the market is expected to grow at the highest rate in the future, driven by economic growth in the Asia Pacific region. Furthermore, most of the vehicles sold globally are produced in these regions.
The most important feature of the driveshaft is to transfer the power of the engine to useful work. Drive shafts are also known as propeller shafts and cardan shafts. In a vehicle, a propshaft transfers torque from the engine, transmission, and differential to the front or rear wheels, or both. Due to the complexity of driveshaft assemblies, they are critical to vehicle safety. In addition to transmitting torque from the engine, they must also compensate for deflection, angular changes and length changes.

type

Different types of drive shafts include helical shafts, gear shafts, worm shafts, planetary shafts and synchronous shafts. Radial protruding pins on the head provide a rotationally secure connection. At least 1 bearing has a groove extending along its circumferential length that allows the pin to pass through the bearing. There can also be 2 flanges on each end of the shaft. Depending on the application, the shaft can be installed in the most convenient location to function.
Propeller shafts are usually made of high-quality steel with high specific strength and modulus. However, they can also be made from advanced composite materials such as carbon fiber, Kevlar and fiberglass. Another type of propeller shaft is made of thermoplastic polyamide, which is stiff and has a high strength-to-weight ratio. Both drive shafts and screw shafts are used to drive cars, ships and motorcycles.
Sliding and tubular yokes are common components of drive shafts. By design, their angles must be equal or intersect to provide the correct angle of operation. Unless the working angles are equal, the shaft vibrates twice per revolution, causing torsional vibrations. The best way to avoid this is to make sure the 2 yokes are properly aligned. Crucially, these components have the same working angle to ensure smooth power flow.
The type of drive shaft varies according to the type of motor. Some are geared, while others are non-geared. In some cases, the drive shaft is fixed and the motor can rotate and steer. Alternatively, a flexible shaft can be used to control the speed and direction of the drive. In some applications where linear power transmission is not possible, flexible shafts are a useful option. For example, flexible shafts can be used in portable devices.

put up

The construction of the drive shaft has many advantages over bare metal. A shaft that is flexible in multiple directions is easier to maintain than a shaft that is rigid in other directions. The shaft body and coupling flange can be made of different materials, and the flange can be made of a different material than the main shaft body. For example, the coupling flange can be made of steel. The main shaft body is preferably flared on at least 1 end, and the at least 1 coupling flange includes a first generally frustoconical projection extending into the flared end of the main shaft body.
The normal stiffness of fiber-based shafts is achieved by the orientation of parallel fibers along the length of the shaft. However, the bending stiffness of this shaft is reduced due to the change in fiber orientation. Since the fibers continue to travel in the same direction from the first end to the second end, the reinforcement that increases the torsional stiffness of the shaft is not affected. In contrast, a fiber-based shaft is also flexible because it uses ribs that are approximately 90 degrees from the centerline of the shaft.
In addition to the helical ribs, the drive shaft 100 may also contain reinforcing elements. These reinforcing elements maintain the structural integrity of the shaft. These reinforcing elements are called helical ribs. They have ribs on both the outer and inner surfaces. This is to prevent shaft breakage. These elements can also be shaped to be flexible enough to accommodate some of the forces generated by the drive. Shafts can be designed using these methods and made into worm-like drive shafts.

vibration

The most common cause of drive shaft vibration is improper installation. There are 5 common types of driveshaft vibration, each related to installation parameters. To prevent this from happening, you should understand what causes these vibrations and how to fix them. The most common types of vibration are listed below. This article describes some common drive shaft vibration solutions. It may also be beneficial to consider the advice of a professional vibration technician for drive shaft vibration control.
If you’re not sure if the problem is the driveshaft or the engine, try turning on the stereo. Thicker carpet kits can also mask vibrations. Nonetheless, you should contact an expert as soon as possible. If vibration persists after vibration-related repairs, the driveshaft needs to be replaced. If the driveshaft is still under warranty, you can repair it yourself.
CV joints are the most common cause of third-order driveshaft vibration. If they are binding or fail, they need to be replaced. Alternatively, your CV joints may just be misaligned. If it is loose, you can check the CV connector. Another common cause of drive shaft vibration is improper assembly. Improper alignment of the yokes on both ends of the shaft can cause them to vibrate.
Incorrect trim height can also cause driveshaft vibration. Correct trim height is necessary to prevent drive shaft wobble. Whether your vehicle is new or old, you can perform some basic fixes to minimize problems. One of these solutions involves balancing the drive shaft. First, use the hose clamps to attach the weights to it. Next, attach an ounce of weight to it and spin it. By doing this, you minimize the frequency of vibration.

cost

The global driveshaft market is expected to exceed (xxx) million USD by 2028, growing at a compound annual growth rate (CAGR) of XX%. Its soaring growth can be attributed to several factors, including increasing urbanization and R&D investments by leading market players. The report also includes an in-depth analysis of key market trends and their impact on the industry. Additionally, the report provides a comprehensive regional analysis of the Driveshaft Market.
The cost of replacing the drive shaft depends on the type of repair required and the cause of the failure. Typical repair costs range from $300 to $750. Rear-wheel drive cars usually cost more. But front-wheel drive vehicles cost less than four-wheel drive vehicles. You may also choose to try repairing the driveshaft yourself. However, it is important to do your research and make sure you have the necessary tools and equipment to perform the job properly.
The report also covers the competitive landscape of the Drive Shafts market. It includes graphical representations, detailed statistics, management policies, and governance components. Additionally, it includes a detailed cost analysis. Additionally, the report presents views on the COVID-19 market and future trends. The report also provides valuable information to help you decide how to compete in your industry. When you buy a report like this, you are adding credibility to your work.
A quality driveshaft can improve your game by ensuring distance from the tee and improving responsiveness. The new material in the shaft construction is lighter, stronger and more responsive than ever before, so it is becoming a key part of the driver. And there are a variety of options to suit any budget. The main factor to consider when buying a shaft is its quality. However, it’s important to note that quality doesn’t come cheap and you should always choose an axle based on what your budget can handle.