Product Description
Customized Roadway Underground Transport Mine Dump Truck Dumper Truck
Mining dumper truck is a heavy-duty dump truck used in open-pit mines to complete the tasks of rock and earth stripping and ore transportation.
In the mining and quarrying industry, mining trucks are the key to efficient, productive operations. Mining dumper trucks work closely with other mining equipment and are required to work multiple days in a single operation. Under such difficult working conditions, mining trucks are required to operate stably and reliably.
| Model | DH-20T | DH-25T |
| Fuel type | Diesel | Diesel |
| Driving style | Left-Handle / Right-Handle Drive | Left-Handle / Right-Handle Drive |
| Engine model | Yuchai210 (Turbocharger Intercooler) | Yuchai290 (Turbocharger Intercooler) |
| Engine power | 155KW(210HP) | 213KW(290HP) |
| Gearbox Mode | Fast 10 Grade | Fast 10 Grade |
| Drive Mode | Default: Rear-engine, Rear-wheel-drive layout(Can be customized) | Default: Rear-engine, Rear-wheel-drive layout(Can be customized) |
| Rear Axle | Steyr(Weighted) | Benz(Weighted) |
| Front Axle | Steyr(Weighted) | Steyr(Weighted) |
| Wheelbase | 3200mm | 3500mm |
| Air Filter | Oil bath air filter | Oil bath air filter |
| Brake Mode | Air-cut Brake (Customizable wet brake) | Air-cut Brake (Customizable wet brake) |
| Frame & Beam | Three-layer automobile riveting frame | Three-layer automobile riveting frame |
| Minimum Ground clearance | 325mm | 325mm |
| Dump lifting Mode | Rear lifting dump, post-unloading, 130X1800mm Double cylinders | Front-mounted single-cylinder, Rear lifting dump style |
| Front Tire | 1000R20 Steel Radial Truck Wire Tire | 1000R20 Steel Radial Truck Wire Tire |
| Rear Tire | 1000R20 Steel Radial Truck Wire Tire(Double) | 1000R20 Steel Radial Truck Wire Tire(Double) |
| Overall Vehicle Size | L6100mm*W2450mm*H2400mm (Remarks: including safety shed total height is 2.75m) | L6800mm*W2400mm*H2400mm (Remarks: including safety shed total height is 2.75m) |
| Hopper Container Dimension | L3800mm*W2300mm*H1000mm | L4600mm*W2400mm*H1100mm |
| The Sheet thickness of Tipping bucket | Bottom Panel: 12mm, Side Panel: 8mm | Bottom Panel: 12mm, Side Panel: 8mm |
| Steering Mode | Hydraulic directional steering device | Hydraulic directional steering device |
| Leaf springs |
Steyr(Weighted) | Front:1480mm*90mm*16mm(12pcs) |
| Steyr(Weighted) | Back:1570mm*90mm*16mm(18pcs) | |
| The Dumper Volume(m³) | 8m³ | 11m³ |
| Climbing Ability | 14° | 14° |
| Rating Loading Capacity(KG) | 20000 | 25000 |
| Exhaust Gas Treatment | Water filter System-Exhaust Purifier | Water filter System-Exhaust Purifier |
| Vehicle mass(KG) | 9.5T | 11T |
| Price | 27500 USD | 31500 USD |
We Provide Customized Dumper Truck According To You Needs.
We Are Professional Manufacturer Since 1996, Providing Customized And OEM, One Station Solution.
| Product Name | Dumper Truck |
|
MOQ |
1Set |
| Supply Ability | 100 sets/month |
|
Packing |
Standard Exprot Carton |
Hot Selling Products
HangZhou CZPT Construction Machinery Co., Ltd. was established in 1996 and have developed to be a professional manufacturer and providing customized and OEM products. We are a high-tech. enterprise in China, our company is certified according to ISO 9001:2015.
We providing mini excavator, forklift, anticorrosion tape, waterproof tape, instrument cluster assembly, cabin assembly, steering column assembly, seat assembly, wiring harness assembly and other spare parts for variety of construction machinery, mining machinery, agricultural machinery, special vehicle machinery. You can choose in combination or individually according to your needs.
In our company 60% of employees are R&D personnel. Hence, we have good ability to research and develop new technologies and products which help us to be 1 of the leaders in China markets. We can design and develop the products with advanced technical performance as per the clients’ requirements, and suitable for various construction machinery, mining machinery, agricultural machinery, special vehicle machinery.
We have cabin assembly workshop, steering column assembly workshop,seat assembly workshop, wire harness assembly workshop,instrument cluster assembly workshop,sheet metal processing workshop,spray paint and power coating workshop.CZPT products have achieved high reputation in construction machinery industry at home and aboard, which are regarded as “the leader in China “by universal customers. Our partners have Shantui, Liugong, Zoomlion,Yishan, Xihu (West Lake) Dis., CRCC etc and have been distributed into more than 30 countries and regions such as Korean, Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand, India, Pakistan, Qatar, Oman, Kuwait, Kazakhstan, Turkey etc.
Our orientation: Strive to provide high-quality products and contribute to increase satisfaction for our clients through our advanced technique, perfect process, reasonable prices and considerate service.
Packaging & Shipping
FAQ
1. Are you original manufacturer?
Zhineng construction machinery is professional manufacturer since 1996 , we provide customized and OEM service, 1 station solution.
2. Which incoterms 2571 terms can we work?
We normally work on FOB, CFR, CIF, CIP.
3. How about the delivery?
15-30 days after first payment , if your product is customized ,may will cost little longer time.
4.What payment terms can we accept?
Normally, we can work on T/T or L/C terms.
5. What logistics ways we can work for shipment?
We can delivery the product by sea, truck, train, air, express delivery.
Driveshaft structure and vibrations associated with it
The structure of the drive shaft is critical to its efficiency and reliability. Drive shafts typically contain claw couplings, rag joints and universal joints. Other drive shafts have prismatic or splined joints. Learn about the different types of drive shafts and how they work. If you want to know the vibrations associated with them, read on. But first, let’s define what a driveshaft is.
transmission shaft
As the demand on our vehicles continues to increase, so does the demand on our drive systems. Higher CO2 emission standards and stricter emission standards increase the stress on the drive system while improving comfort and shortening the turning radius. These and other negative effects can place significant stress and wear on components, which can lead to driveshaft failure and increase vehicle safety risks. Therefore, the drive shaft must be inspected and replaced regularly.
Depending on your model, you may only need to replace 1 driveshaft. However, the cost to replace both driveshafts ranges from $650 to $1850. Additionally, you may incur labor costs ranging from $140 to $250. The labor price will depend on your car model and its drivetrain type. In general, however, the cost of replacing a driveshaft ranges from $470 to $1850.
Regionally, the automotive driveshaft market can be divided into 4 major markets: North America, Europe, Asia Pacific, and Rest of the World. North America is expected to dominate the market, while Europe and Asia Pacific are expected to grow the fastest. Furthermore, the market is expected to grow at the highest rate in the future, driven by economic growth in the Asia Pacific region. Furthermore, most of the vehicles sold globally are produced in these regions.
The most important feature of the driveshaft is to transfer the power of the engine to useful work. Drive shafts are also known as propeller shafts and cardan shafts. In a vehicle, a propshaft transfers torque from the engine, transmission, and differential to the front or rear wheels, or both. Due to the complexity of driveshaft assemblies, they are critical to vehicle safety. In addition to transmitting torque from the engine, they must also compensate for deflection, angular changes and length changes.
type
Different types of drive shafts include helical shafts, gear shafts, worm shafts, planetary shafts and synchronous shafts. Radial protruding pins on the head provide a rotationally secure connection. At least 1 bearing has a groove extending along its circumferential length that allows the pin to pass through the bearing. There can also be 2 flanges on each end of the shaft. Depending on the application, the shaft can be installed in the most convenient location to function.
Propeller shafts are usually made of high-quality steel with high specific strength and modulus. However, they can also be made from advanced composite materials such as carbon fiber, Kevlar and fiberglass. Another type of propeller shaft is made of thermoplastic polyamide, which is stiff and has a high strength-to-weight ratio. Both drive shafts and screw shafts are used to drive cars, ships and motorcycles.
Sliding and tubular yokes are common components of drive shafts. By design, their angles must be equal or intersect to provide the correct angle of operation. Unless the working angles are equal, the shaft vibrates twice per revolution, causing torsional vibrations. The best way to avoid this is to make sure the 2 yokes are properly aligned. Crucially, these components have the same working angle to ensure smooth power flow.
The type of drive shaft varies according to the type of motor. Some are geared, while others are non-geared. In some cases, the drive shaft is fixed and the motor can rotate and steer. Alternatively, a flexible shaft can be used to control the speed and direction of the drive. In some applications where linear power transmission is not possible, flexible shafts are a useful option. For example, flexible shafts can be used in portable devices.
put up
The construction of the drive shaft has many advantages over bare metal. A shaft that is flexible in multiple directions is easier to maintain than a shaft that is rigid in other directions. The shaft body and coupling flange can be made of different materials, and the flange can be made of a different material than the main shaft body. For example, the coupling flange can be made of steel. The main shaft body is preferably flared on at least 1 end, and the at least 1 coupling flange includes a first generally frustoconical projection extending into the flared end of the main shaft body.
The normal stiffness of fiber-based shafts is achieved by the orientation of parallel fibers along the length of the shaft. However, the bending stiffness of this shaft is reduced due to the change in fiber orientation. Since the fibers continue to travel in the same direction from the first end to the second end, the reinforcement that increases the torsional stiffness of the shaft is not affected. In contrast, a fiber-based shaft is also flexible because it uses ribs that are approximately 90 degrees from the centerline of the shaft.
In addition to the helical ribs, the drive shaft 100 may also contain reinforcing elements. These reinforcing elements maintain the structural integrity of the shaft. These reinforcing elements are called helical ribs. They have ribs on both the outer and inner surfaces. This is to prevent shaft breakage. These elements can also be shaped to be flexible enough to accommodate some of the forces generated by the drive. Shafts can be designed using these methods and made into worm-like drive shafts.
vibration
The most common cause of drive shaft vibration is improper installation. There are 5 common types of driveshaft vibration, each related to installation parameters. To prevent this from happening, you should understand what causes these vibrations and how to fix them. The most common types of vibration are listed below. This article describes some common drive shaft vibration solutions. It may also be beneficial to consider the advice of a professional vibration technician for drive shaft vibration control.
If you’re not sure if the problem is the driveshaft or the engine, try turning on the stereo. Thicker carpet kits can also mask vibrations. Nonetheless, you should contact an expert as soon as possible. If vibration persists after vibration-related repairs, the driveshaft needs to be replaced. If the driveshaft is still under warranty, you can repair it yourself.
CV joints are the most common cause of third-order driveshaft vibration. If they are binding or fail, they need to be replaced. Alternatively, your CV joints may just be misaligned. If it is loose, you can check the CV connector. Another common cause of drive shaft vibration is improper assembly. Improper alignment of the yokes on both ends of the shaft can cause them to vibrate.
Incorrect trim height can also cause driveshaft vibration. Correct trim height is necessary to prevent drive shaft wobble. Whether your vehicle is new or old, you can perform some basic fixes to minimize problems. One of these solutions involves balancing the drive shaft. First, use the hose clamps to attach the weights to it. Next, attach an ounce of weight to it and spin it. By doing this, you minimize the frequency of vibration.
cost
The global driveshaft market is expected to exceed (xxx) million USD by 2028, growing at a compound annual growth rate (CAGR) of XX%. Its soaring growth can be attributed to several factors, including increasing urbanization and R&D investments by leading market players. The report also includes an in-depth analysis of key market trends and their impact on the industry. Additionally, the report provides a comprehensive regional analysis of the Driveshaft Market.
The cost of replacing the drive shaft depends on the type of repair required and the cause of the failure. Typical repair costs range from $300 to $750. Rear-wheel drive cars usually cost more. But front-wheel drive vehicles cost less than four-wheel drive vehicles. You may also choose to try repairing the driveshaft yourself. However, it is important to do your research and make sure you have the necessary tools and equipment to perform the job properly.
The report also covers the competitive landscape of the Drive Shafts market. It includes graphical representations, detailed statistics, management policies, and governance components. Additionally, it includes a detailed cost analysis. Additionally, the report presents views on the COVID-19 market and future trends. The report also provides valuable information to help you decide how to compete in your industry. When you buy a report like this, you are adding credibility to your work.
A quality driveshaft can improve your game by ensuring distance from the tee and improving responsiveness. The new material in the shaft construction is lighter, stronger and more responsive than ever before, so it is becoming a key part of the driver. And there are a variety of options to suit any budget. The main factor to consider when buying a shaft is its quality. However, it’s important to note that quality doesn’t come cheap and you should always choose an axle based on what your budget can handle.
