Product Description
Specification
Ground anchor system is a modern foundation system,using the drilling machine to install which makes it as the most efficient and cost-saving footing solution.It can be widely applied to different soil conditions. Ground screw can be used for many kinds of application, like solar system; timer-fram construction; advertising and traffic systems; urban garden and landscape construction; flag poles and so on.
| Product Name | Ground Screw/Post Spike/Post anchor/Ground anchor |
| Pipe Material | Q235B |
| Pipe Diameter | 48-89mm |
| Pipe length | 600mmm-3000mm |
| Pipe thickness | 2-4mm |
| Anti-Corrosive | Hot dipped Galvanized |
| Application | Solar power ayatem, Construction System |
| Feature | Quick installation |
Advantages:
A. Compatibility With All Type Of Structures
B. Foundation Solution Concrete Free.
C. Surrounding Areas Remains Unspoiled.
D. Easy Remove Simple And Easy To Relocate.
Feature:
–100% high-quality of Q235 Galvanized steel material
–Good performance on anti-corrosion(galvanized)
–Quick and simple installation
–Structural analysis based on the latest research on wind dynamics
–International standard, ASNZS1170, ISO9001, SGS, TUV, etc. certificates
–Flexibility on configuration
Product Discription
Angle Brackets and straps are ideal for high-quality load-bearing wood/wood and wood/concrete connections in timber construction. Universally suitable for standard connections such as intersecting timbers.
Joist Hangers are designed for use where a strong, rigid joint is required between meombers meeting at 90°, e.g. truss/joist to beam, or rafter to bearer cnnection.
Post spike is a kind of metal bracket with four-fins to grip the earth firmly. Its simple design and convenient way of installation make it popular with out customers. Great majority of post spikes are used in farm and garden fencing, meanwhile, it can be used in mail box, traffic signs, timer construction, etc.
Ground screw is a kind of drilling pile with high gripping strength regardless of the terrains, such as sandy soil, marsh and loose earth. According to its excellent durability and stability, it has been widely used in solar power systems.
Ground anchor is a necessary hardware for camping owning to its easy way of installation and light weight. There is no need of high twisting strength even a child can operate it pretty well Attached with chains and ropes, it also can secure items such as plants, motorcycle, guyed structure, even your pets, etc.
Post support is a kind of post anchor used to support the wooden or metal post and keeping them from the damage of moisture and termites. We supply 4 types of post supports (H Type, L Type, T Type and U Type) to meet the different needs of various applications.
Post base is a metal device specially designed for the basic protection to the post by isolating it from the ground, which contains water to quicken the rotting of the post. No need of CZPT and screwing makes it easy to install and be widely used in timber constructions.
Package&Shipping
Normal Package
1.Bulks and pallets
2.We also can make special package for you ,but cost for special package will bear by client.
Reliable Packing and timely Delivery make sure our best Service to you.
You could choose deliver your order by sea ,by air, or by Express, which depends on your special request.
Delivery Details
1.Normal delivery times is from 15 to 45 days after receiving the deposit
2.According to the quantities and specifications of each order
Shipping
1. Large Quantity Transport By Sea
2. Small Quantity or Sample Transport By Air
3. Inland Transport By Train
4. Shipping according to customers requirement
PORT: Xihu (West Lake) Dis.g Port , HangZhou Port, ZheJiang Airport
FAQ
1.Q:Are you manufacturer or trading company?
A:We are a manufacturer which was established 2008 and have 11 year producing experence.
2.Q:Why should i choose you?
A:As a professional manufacturer, we can provide you best customer experience from Price and quality,service
And we have very quick reponse system, so your question will be reply in 1 hour.
3.Q:What is the material of your products?
A:The material is DX51+Z275 OR G300 (A kind of Galvanized sheet), We also provide products with Mild steel, stainless steel ( Sus 304.316. 201 301. 430 etc.,) Copper, brass, Aluminum(Al 6061,6016,6063 etc.)
4.Q:How does your factory do regarding quality control?
A:Quality is priority. We always attach great importance to quality controlling from the very
beginning to the very end.
5. Q: How can I get some samples?
A: We are honored to offer you samples.
6. Q:When will you make the delivery?
A: 7-10 working days after received your payment.
7. Q: What is your after-sale service?
A: We offer 100% guarantee on our product.
8. Q: What is your MOQ?
A: Any quantity is acceptable for your order. And the price is negotiable for large quantity.
9.Q:What’s the thickness of your product?
A: In general, in addition to the larger load bearing products, other products, such as Nail plate, Joist hanger and bent plate connections, are likely to be in thickness of 1 mm, 2 mm, 2.5 mm and 3 mm. Because we are factories, we provide customized service to our customers. We can do the production according to the customers’ reasonable requirements.
Other Products
Feeback
The Different Types of Splines in a Splined Shaft
A splined shaft is a machine component with internal and external splines. The splines are formed in 4 different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right 1 for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.
Involute splines
Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.
Parallel splines
Parallel splines are formed on a splined shaft by putting 1 or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.
Serrated splines
A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.
Ball splines
The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is 1 of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least 1 ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to 1 another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the 2 shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.
Sector no-go gage
A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has 2 groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other 2 pressure angles. It is often used when the splined shaft material is harder than usual.
