Product Description

 

Detailed Photos

 

Product Parameters

Description	Unit	Parameter
Processing log length	mm	970mm–1270mm
Processing log diameter	mm	500mm maximum–28mm minimum
Processing range thickness	mm	0.3mm–4.0mm
Host line speed	m/min	60m–80m speed regulation
Main and auxiliary motor power	kw	Double roller servo motor 11kw; Single roller motor 11kw.
		Feed motor 11kw; Shear motor 1.5kw.
		Rubber roller conveying motor 1.5kw
total power	kw	36kw
Reducer model	R87	Single and double roller motor and feed motor adopts a enlarged hard surface reducer.
	RV90	Rubber roller conveying motor and shear motor adopts a enlarged worm gear reducer.
Main fuction	Unmanned boot system;Advance and retreat knife automatically and quickly;Cast iron tool post;Electric and common machinery servo;
	A whole set of entire imported pneumatic;Domestic electronic control system;
	High alloy screw and tin bronze nut;Automatic fuction of fuel feeding, lubrication,applying butter;
	High knife without adjustment; 8.8 high strength bolt of whole machine;
	Abrasion resistant,straight and precise cast iron track;Thickening chrome-plating roller with lumina finely reticulate and tempered managment;
	Both sides of board surface lights;Plus or minus 0.05mm rotary-cut accuracy;Remaining tail plate automatic cutting fuction;

Certifications

 

 

Packaging & Shipping

 

Pre-sale service
1) Provide the free consultation of equipment
2) Provide the standard device and the flow chart
3) According to the clients’ special requirement ,offering the resonable plan and free design to help to select the equipment .
4)Welcome to visit our factory.
Service during the sales
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment.
3) Train the first-line operator.
We also have logistics departments to make sure of the prompt delivery.

After Sales Service

1) 24 hours online service.
2) Provide the VIDEO with install and debug the equipment.
3) Provide technical exchanging.

Company Profile

  ZheJiang  Xuanjin Machinery Co., LTD. formerly known as Feigou CZPT Rotary Cutting Machinery Factory founded in 2008, was established in January 2015 with a registered capital of 80 million yuan after 9 years of rapid development.The company has more than 100 employees, including 28 technology research and development personnel. 
  In 2016, the company was awarded the “National high-tech Enterprise”, and by 2571, it has successively obtained more than 100 national patents, including nearly 10 national invention patents.
 

  Since 2012, the company’s products have been successfully exported to the  US,Canada,Brazil,Russia andother more than 50 countries and well received by foreign customers.Now it has become a well-known enterprise in the industry with an annual output value of nearly 100 million yuan.Its advanced degree of equipment in the same industry is far ahead.
 

  Our company has been committed to the research and development and manufacturing of plywood equipment.Improving the production process of nearly 100 years old is our core purpose and we adhere to the policy of “Focus on rotary cutting, global service and lifelong after-sales”.The main products are rotary cutting machine and record peeling machine to find round,independent research and development of single board rotary cutting vacuum plate collection line,high-grade furniture intelligent molding line, thick core plate rotary cutting drying molding line and other advanced equipment in the domestic leading level.

Our Advantages

FAQ:
Q1:Can you customize products for clients?
A1: Yes We can customize and produce woodworking machines according to the customer’s requirements or drawings.Our factory has a history for more than 15 years,so we have abundant experience to finish it.
Q2:What about your products quality?
A2:21.We are quite proud of our craftsmanship,and you can check our certifications and awards above.We can provide you samples for quality inspection. If you order, we guarantee the quality is same with sample. In case of quality problem, we can sign agreements and our company will perform the duties.
Q3:How can we trust your factory?
A3:Our products have won a relatively high fame in the market for the past years.We recommend that you come to our factory to see the goods,to verify the real situation of the products, and know more about our factory.
Q4:Why does the price often change?
A4:The price depends on the latest prices of the raw materials,and it is according to the market changes.
Q5:What about the contract signing?
A5: If you’re satisfied with the products and our service, you can sign the contract with us, pay the deposit Then we’ll produce the machines as soon as possible. If you are far away, we can sign the contract by fax. We will ensure the quality of the products and the accessories are complete. 
Q6: How about delivery?
A: when the product is ready, it can be delivered to you after your full payment. We will provide technical guidance.

Up to now,we have attended and held many excellent exhibitions and cooperated with many outstanding companies.Looking forward to your comming.

Different parts of the drive shaft

The driveshaft is the flexible rod that transmits torque between the transmission and the differential. The term drive shaft may also refer to a cardan shaft, a transmission shaft or a propeller shaft. Parts of the drive shaft are varied and include:
The driveshaft is a flexible rod that transmits torque from the transmission to the differential

When the driveshaft in your car starts to fail, you should seek professional help as soon as possible to fix the problem. A damaged driveshaft can often be heard. This noise sounds like “tak tak” and is usually more pronounced during sharp turns. However, if you can’t hear the noise while driving, you can check the condition of the car yourself.
The drive shaft is an important part of the automobile transmission system. It transfers torque from the transmission to the differential, which then transfers it to the wheels. The system is complex, but still critical to the proper functioning of the car. It is the flexible rod that connects all other parts of the drivetrain. The driveshaft is the most important part of the drivetrain, and understanding its function will make it easier for you to properly maintain your car.
Driveshafts are used in different vehicles, including front-wheel drive, four-wheel drive, and front-engine rear-wheel drive. Drive shafts are also used in motorcycles, locomotives and ships. Common front-engine, rear-wheel drive vehicle configurations are shown below. The type of tube used depends on the size, speed and strength of the drive shaft.
The output shaft is also supported by the output link, which has 2 identical supports. The upper part of the drive module supports a large tapered roller bearing, while the opposite flange end is supported by a parallel roller bearing. This ensures that the torque transfer between the differentials is efficient. If you want to learn more about car differentials, read this article.

It is also known as cardan shaft, propeller shaft or drive shaft

A propshaft or propshaft is a mechanical component that transmits rotation or torque from an engine or transmission to the front or rear wheels of a vehicle. Because the axes are not directly connected to each other, it must allow relative motion. Because of its role in propelling the vehicle, it is important to understand the components of the driveshaft. Here are some common types.
Isokinetic Joint: This type of joint guarantees that the output speed is the same as the input speed. To achieve this, it must be mounted back-to-back on a plane that bisects the drive angle. Then mount the 2 gimbal joints back-to-back and adjust their relative positions so that the velocity changes at 1 joint are offset by the other joint.
Driveshaft: The driveshaft is the transverse shaft that transmits power to the front wheels. Driveshaft: The driveshaft connects the rear differential to the transmission. The shaft is part of a drive shaft assembly that includes a drive shaft, a slip joint, and a universal joint. This shaft provides rotational torque to the drive shaft.
Dual Cardan Joints: This type of driveshaft uses 2 cardan joints mounted back-to-back. The center yoke replaces the intermediate shaft. For the duplex universal joint to work properly, the angle between the input shaft and the output shaft must be equal. Once aligned, the 2 axes will operate as CV joints. An improved version of the dual gimbal is the Thompson coupling, which offers slightly more efficiency at the cost of added complexity.

It transmits torque at different angles between driveline components

A vehicle’s driveline consists of various components that transmit power from the engine to the wheels. This includes axles, propshafts, CV joints and differentials. Together, these components transmit torque at different angles between driveline components. A car’s powertrain can only function properly if all its components work in harmony. Without these components, power from the engine would stop at the transmission, which is not the case with a car.
The CV driveshaft design provides smoother operation at higher operating angles and extends differential and transfer case life. The assembly’s central pivot point intersects the joint angle and transmits smooth rotational power and surface speed through the drivetrain. In some cases, the C.V. “U” connector. Drive shafts are not the best choice because the joint angles of the “U” joints are often substantially unequal and can cause torsional vibration.
Driveshafts also have different names, including driveshafts. A car’s driveshaft transfers torque from the transmission to the differential, which is then distributed to other driveline components. A power take-off (PTO) shaft is similar to a prop shaft. They transmit mechanical power to connected components. They are critical to the performance of any car. If any of these components are damaged, the entire drivetrain will not function properly.
A car’s powertrain can be complex and difficult to maintain. Adding vibration to the drivetrain can cause premature wear and shorten overall life. This driveshaft tip focuses on driveshaft assembly, operation, and maintenance, and how to troubleshoot any problems that may arise. Adding proper solutions to pain points can extend the life of the driveshaft. If you’re in the market for a new or used car, be sure to read this article.

it consists of several parts

“It consists of several parts” is 1 of 7 small prints. This word consists of 10 letters and is 1 of the hardest words to say. However, it can be explained simply by comparing it to a cow’s kidney. The cocoa bean has several parts, and the inside of the cocoa bean before bursting has distinct lines. This article will discuss the different parts of the cocoa bean and provide a fun way to learn more about the word.

Replacement is expensive

Replacing a car’s driveshaft can be an expensive affair, and it’s not the only part that needs servicing. A damaged drive shaft can also cause other problems. This is why getting estimates from different repair shops is essential. Often, a simple repair is cheaper than replacing the entire unit. Listed below are some tips for saving money when replacing a driveshaft. Listed below are some of the costs associated with repairs:
First, learn how to determine if your vehicle needs a driveshaft replacement. Damaged driveshaft components can cause intermittent or lack of power. Additionally, improperly installed or assembled driveshaft components can cause problems with the daily operation of the car. Whenever you suspect that your car needs a driveshaft repair, seek professional advice. A professional mechanic will have the knowledge and experience needed to properly solve the problem.
Second, know which parts need servicing. Check the u-joint bushing. They should be free of crumbs and not cracked. Also, check the center support bearing. If this part is damaged, the entire drive shaft needs to be replaced. Finally, know which parts to replace. The maintenance cost of the drive shaft is significantly lower than the maintenance cost. Finally, determine if the repaired driveshaft is suitable for your vehicle.
If you suspect your driveshaft needs service, make an appointment with a repair shop as soon as possible. If you are experiencing vibration and rough riding, driveshaft repairs may be the best way to prevent costly repairs in the future. Also, if your car is experiencing unusual noise and vibration, a driveshaft repair may be a quick and easy solution. If you don’t know how to diagnose a problem with your car, you can take it to a mechanic for an appointment and a quote.