Product Description

Hydraulic Dredging Cutter Suction Dredger Dredge Equipment Machine Manufacturer Sand Mud in River Port Government Tender Bangladesh Hydraulic /Electric Drive

1) Products Profile:
Cutter Suction Dredger is self-propelled or non self-propelled, portable cutter dredger. Hull can be dismantled and re-assemble easily with box structure, equipped with horizontal shifting devices, cutter ladder lifting devices, spud devices, deck crane and so on. Widly used in sand-excavaing, river dredging, desiliting , reclamation for channels and land, port construction, etc.

1. Wide range of use applications
2. High efficiency, large output, long pump distance, low fuel consumption
3. Rexroth, CZPT full hydraulic control 
4. Siemens PLC is easy to operate
5. Engine choiced from Weichai, Cummins, Caterpillar and more. 
6. Equipped with Australian Warman technology dredge pump
7. The modular design enables fast assembly with HID seniors engineers 
8. Dredger components available in factories to allow short delivery times 
9. Control the working process of dredging and pumping, delivering dredged materials. lower cost;
10. Follow manufacture guideline: CCS-ZC standard
11. CE ISO certificates acquired to prove high quality 
12. Western Dredge brand parts, easy to find globally 
13. Can choose reliable Chinese brand parts to lower costs 
14. Gain access to our sales team, design team, manufacture team 24/7
15. Lifetime Technical Assistance 

2) Technical specification

(1) Brief Specification of hot selling model:

Model	Sand and solid capacity	Max. dredging depth	Discharge distance
HJ 200	160m3/h	8m	800m
HJ 250	200 m3/h	9m	1000m
HJ 300	300 m3/h	10m	1200m
HJ 350	400 m3/h	11m	1500m
HJ 400	500 m3/h	13m	1500m
HJ 450	600 m3/h	14m	1500m
HJ 500	800 m3/h	15m	2000m
HJ 550	900 m3/h	16m	2000m
HJ 600	1100 m3/h	16m	2000m
HJ 650	1200 m3/h	16m	2100m
HJ 700	1400 m3/h	17m	2200m
HJ 800	1500 m3/h	17m	2500m
HJ 300D	500 m3/h	16m	1500m
HJ 400D	825 m3/h	22m	1500m
HJ 500D	1000 m3/h	25m	2000m
HJ 600D	1800 m3/h	25m	2000m
HJ 700D	2250 m3/h	28m	2500m
HJ 800D	2400 m3/h	30m	2500m

(2) Detail specification of model HJ350:

Model	HJ350
LOA	30.0m
Hull size (L*B*H)	19.0*7.5*2.0m
Main pontoon (L*B*H)	13.8*3.5*2.0m
Side Pontoon (L*B*H)	19.0*2.0*2.0m
Structure	Box-structure
Main engine brand & power	Cummins 477kw
Auxiliary engine brand & power	Cummins 224kw
Head	45m
Max. dredging depth	11m
water flow	2000m³/h
Solid sand capacity	400m³/h
Discharge Distance	1500m
Draught	1.4m
Total Weight	90T

★ All these parameters are just for reference. We can provide the machine according to your different requirements.

3) Dredgers Production in Workshop:

4) Haijie Dredgers Parts:

5) Packing &Shipping:
* Smaller size dredger will be transported by container, and engineers will go to job site to assembly, testing and training.
* Bigger size dredger with diapatchable constructure, will be transported by trailer truck on land and by bulk cargo ship by sea.

6) Aftersale Service:
1.Profestional people serve the technical consult.
2.All the dredgers can be coustomed.
3.We are factory which can provide the higher quality and lower price.
4.Free field Installation,commissioning,training and and free product drawings.
5.Provide professional service and providesolution in a timely manner.
6.Free repair if quality problems happen.
7. Responsible Sales team, design team, manufacture team available 24/7 to best serve clients 
8. Offering spare parts at a discounted price 

7) Company Information:
HangZhou HAIJIE Machinery Equipment Co.,Ltd is a famous manufacter of engineering equipment in China and even in the world,which is mainly engaged in cutter suction  dredger,dredging machine and sand dredging machine.The compony has more than 100employees,with intenal organizatin inteqrity,advanced management methods. 

8) Customer Visiting:

9) FAQ:

Q: Are you trading company or manufacturer ? 
A: We are factory.

Dredger Sand Suction machine for river dredging

Q: I never used this kind of machine, how should i do?

A:Our engineers will CZPT you in the installation and use, and we will offer english manual and CZPT video.
And when our enginner install for you abroad, they will train your staff for free.

Dredger Sand Suction machine for river dredging

Q: Warranty period?

A:We provide 1 year warranty and free repair .We will send you the broken parts in warranty period. Pls feel free to contact me by Email/Skype/Whatsapp 24hours.

Q2, What are the services the Haijie company is providing?
 
A: Free dredger consultation, drawing design, customization, on-site visits, 24/7 availability, free assembly, training, operation testing, and lifetime technical assistance.

10)Feedbacks from Customer:

11)Contact Information:

 If you need further information about our products, please send your message to me in below form. 

Screw Sizes and Their Uses

Screws have different sizes and features. This article will discuss screw sizes and their uses. There are 2 main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.

The major diameter of a screw shaft

The major diameter of a screw shaft is the distance from the outer edge of the thread on 1 side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between 2 and 16 inches. A screw with a pointy tip has a smaller major diameter than 1 without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is 1 element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.

The pitch diameter of a screw shaft

When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of 1 thread to the corresponding point on the next thread. Measurement is made from 1 thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.

The thread depth of a screw shaft

Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in 1 revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.

The lead of a screw shaft

Pitch and lead are 2 measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are 2 ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with 2 or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.

The thread angle of a screw shaft

The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are 2 types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.

The tapped hole (or nut) into which the screw fits

A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.