Product Description
reverse circulation multifunctional water well drilling rig
Product Parameters
| Max drilling depth | 280m | Drilling diameter | 115-305 mm |
| Air pressure | 1.05-3 Mpa | Air consumption | 16-42 m³/min |
| Drill pipe length | 3 m | Drill pipe diameter | 89/108/207 mm |
| Axial pressure | 5 T | Lifting force | 12 T |
| Fast lifting speed | 14.5 m/min | Fast feeding speed | 21 m/min |
| Max rotary torque | 4000-5700 Nm/2820-3300 Nm | Max rotary speed | 0-120 r/min / 0-150 r/min |
| Driving speed | 2.5 Km/h | Drilling efficiency | 10-25 m/h |
| Weight of drilling rig | 7 T | Uphill angle | 21° |
| Working condition | loose bed and bedrock | Dimension | 6.3×2.1×2.8 m |
| Matched DTH hammer | Medium and high wind pressure series | Drilling methods | Top drive hydraulic slewing and propulsion, DTH impactor or mud drilling |
Off-the-shelf reverse circulation multifunctional water well drilling rig
Full hydraulic control is convenient and flexible
The rotation speed, torque, thrust axial pressure, reverse axial pressure, thrust speed, and lifting speed of the drilling rig can be adjusted at any time to meet the needs of different drilling tool operating conditions and different construction processes
Top drive rotary propulsion lift
It is easy to connect and unload the drill pipe, shorten the auxiliary time, and also facilitate the drilling with the pipe.
multifunctional drilling
Various drilling techniques can be used on this rig, such as: DTH drilling, through air reverse circulation drilling, air lift reverse circulation drilling, cutting drilling, roller cone drilling, pipe drilling and Core drilling in development and more. The drilling rig can be equipped with mud pump, foam pump and generator according to user needs. The rig also comes standard with a variety of winches.
High working efficiency
Due to the full hydraulic and top drive rotary propulsion lifting, it is suitable for various drilling processes and various drilling tools, with convenient and flexible control, fast drilling speed and short auxiliary time, so the operation efficiency is high.
low cost
The drilling on the rock is mainly based on the down-the-hole hammer drilling process. The down-the-hole hammer rock drilling operation efficiency is high, and the drilling cost per meter is lower.
high outrigger tracked
The high outriggers are convenient for loading and transportation, and can be loaded directly without a crane. Crawler walking is more suitable for muddy field movement.
Positive and negative axial pressure adjustment
The best impact efficiency of each impactor has its optimum shaft pressure and rotation speed. During the drilling process, with the increasing number of drill pipes, the axial pressure on the impactor is also increasing. Therefore, the positive and negative axial pressure valves are adjusted during construction to ensure that the impactor can obtain a more matching axial pressure. The impact efficiency is higher at this time.
The role of the lubricator
Efficient and durable lubricators and oil mist pumps. During the drilling process, lubricate the impactor running at high speed all the time to maximize its service life.
Rig chassis
It can be a tracked self-propelled chassis or a vehicle-mounted self-propelled chassis.
The value of second-hand mobile phones in the same industry is higher
As the main components of the drilling rig are imported brands, and the main frame of the drilling rig is made of high-quality high-strength low-carbon alloy steel, which increases the overall strength and is very wear-resistant, as well as the more important hydraulic system, which is very valuable.
Detailed Photos
Our Advantages
FAQ
Q: Are you a manufacturer or trading company?
A: We are a specialized manufacturer.
Q: What are your main products, and used for?
A: Our products include core barrel, casing, drill rod, drill rig and other drilling parts.They are used for mineral exploration, geological drilling,
Q: How about the delivery terms?
A: 1.Payment: T/T, L/C, Western Union, Paypal, 30% deposit in advance and rest before delivery
2. Min. order quantity: 1 piece.
3. Transportation: By sea, train.
Q: How about discount?
A: Price is based on products and order quantity.
Q: Do you accept sample order?
A: Yes sure, please contact us for details.
Q: Where is your factory located in?
A: Our factory is located in HangZhou city, ZheJiang province, China.
Q: How does your company control the quality?
A: Quality first. In order to guarantee high quality for our products, our always make a serious inspection for all products and raw materials in strict procedure.
We have obtained certificate of ISO9001*Yikuang is professional production of drilling tools, if you want to know more about our products, please feel free to contact us.
130m ,150m,180m,200m,300m,400m,500m,..800m dth drill rig are all in available.Pls feel freely to contact us !!!
Drive shaft type
The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
tube yoke
Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
end yoke
If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.
