Tag Archives: machines china

China Standard 6 Cavity Servo Drive Automatic Juice Production Line Use Pet Bottle Making Blow Moulding Machines with Best Sales

Product Description

6 cavity servo drive automatic juice production line use PET bottle making blow moulding machines

Technical Parameters

Model Item PM-A2 PM-A4 PM-A6
Produtivity Depend on bottle design 1800-2000 PCS/H 3200-4000 PCS/H 4000-5500 PCS/H
Product type Volume 0.1-2.0L 0.1-2.0L 0.1-2.0L
Body diameter ≤100mm ≤100mm ≤100mm
Height ≤310mm ≤310mm ≤330mm
Neck diameter ≤38mm ≤38mm ≤38mm
Mold Cavity 2 4 6
Mold thickness 240mm 240mm 240mm
Mold volume 260*240*370mm 510*240*360mm 640*240*360mm
Main machine Power Electrical source power 220V/380V 50/60HZ
  3Phase 3Phase 3Phase
Rated Power 25KW 49KW 73KW
Really use power 6.5KW 13 25
Air system HP air compressor 1.6m3/min 3.0Mpa 3.0m3/min 3.0Mpa 6.0m3/min 3.0Mpa
LP air compressor 1.0m3/min 1.0Mpa 1.6m3/min 1.0Mpa 2.0m3/min 1.0Mpa
Air Tank 0.6m3 3.0Mpa 0.6m3 3.0Mpa 1.0m3 3.0Mpa
Air dryer 1.0m3/min 3.0Mpa 2.0m3/min 3.0Mpa 6.0m3/min 3.0Mpa
Cooling water Water Chiller 3HP 3HP 5HP
Machine Size(L*W*H) 1900*1280*1930mm 1900*1860*1930mm 4100*1400*1800mm
Weight 2000kg 3600kg 3000kg
Preform unscrambler Size(L*W*H) 2000*950*2480mm 2000*950*2480mm 2000*950*2480mm
Weight 250kg 250kg 250kg

The Automatic PET bottle blowing machine is suitable for the production of 0.1L-2.0L plastic containers and round and square bottles.
Fully automatic blow molding machine, freeing hands all the time, automatically adding preforms, automatic molding.
PLC controller, easy to operate, make different molds according to different customer products, and produce suitable products.
The whole Automatic PET bottle blowing machine adopts SS304 material, and the thickness is higher than that of the same industry machine. More efficient.

Main Features for PET Bottle Blowing Machine
1. Stable performance with advanced PLC.
2. Automatic preform conveyer to save human cost.
3. Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4. High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5. High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6. Introduce the FESTO air cylinder to avoid contamination and noise.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into 3 parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mould.
9. Two ways of operating: Automatic and manual.
10. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
11. Contamination is avoided for the bottle body.
12. Ideal effect of the chilling with the chilling system.
13. Easy installation and starting
14. Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.

Cylinder of PET Bottle Blowing Machine

Brand: FESTO 
Original: Germany 
Domestic famous engines, strong driving force, low fuel consumption, high economic benefits 12F+4R sliding sleeve shift.

Holding Part of PET Bottle Blowing Machine

Brand:KTO
Original: Germany 
With Strong catching preform convey to the next step

Blowing cylinder of PET Bottle Blowing Machine

Brand: FESTO 
Original: Germany 
Domestic famous engines, strong driving force, low fuel consumption, high economic benefits 12F+4R sliding sleeve shift.

Air compressor,filter,air tank 

Brand: Hengda
Original: China 
Complete supply the machine with required gas.

Our Service

Installation service
When you finish the Preparation conditions, our fast and professional aftersales service engineer team will go to your factory to install the machine, give you the operating manual, and train your employee until they can operate the machine well. 

The sample service
1. We can send you the video of the running machine. 
2. You are welcome to come to visit our factory, and see the machine running. 

Customized service
1. We can design the machines according your requirements(materil, power, filling type, the kinds of the bottles, and so on), at the same time we will give you our professional suggestion, as you know, we have been in this industry for many years. 

After-sales service
1. We will delivery the machine and provide the bill of load on time to make sure you can get the machine quickly
2. When you finish the Preparation conditions, our fast and professional aftersales service engineer team will go to your factory to install the machine, give you the operating manual, and train your employee until they can operate the machine well. 
3. We often ask feedback and offer help to our customer whose machine have been used in their factory for some time. 
4. We provide 1 year warranty
5. Well-trained & experienced staff are to answer all your inquiries in English and Chinese
6.24 hours for engineer response (all services part 5days in customer hand by Intl’ courier). 
7.12 Months guarantee and life-long technical support. 
8. Your business relationship with us will be confidential to any third party. 
9. Good after-sale service offered, please get back to us if you got any questions. 

Quality Control
We have the single quality department, that make sure the material of the raw materials is good, and ensure the machine running smoothly. 

If you want to know more information about the product, You can send an inquiry, we will solve any of your problems and send you running video. 

HangZhou Proman Machine Co. Ltd,is a production manufacturer and exporter specialized in water treatment plants,beverage filling machine, packing machine, bottle blowing machine, injection moulding machine and spare parts of filling line.
Our factory was established in the year of 1998, with the long history of accumulated experience in filling machine industry in south ZheJiang . There are many development engineers of filling machine in our company. We devote ourselves to the development, research and production of liquid food and beverage packing and filling industry.
Besides, we have our own designs for the bottles.
 
Proman Machine cooperated with many customers in recent years, we win the trust of customers from our high-quality products. And we are looking forward to the future cooperation with you if our products can impress you deeply!

FAQ

1. Where is your factory?
Our Factory is located in HangZhou City, 2 hours drive from ZheJiang and 1 hour drive from HangZhou(airplane & high-speed rail). If you arrive at ZheJiang or HangZhou, we can pick you up to visit our factory. 

2. Do you have any technical supports with your Beverage Filling Machines?
Yes, We have a professional team of engineers who owned many installation, debug and training experiences abroad, are available to service machinery overseas. 

3. What’s your guarantee or the warranty of the quality if we buy your machines?
We offer high quality machines with 1 year warranty and supply life-long technical support.
You’re always welcome to visit our company. If you have any interest on our products. Please do not hesitate to contact us.

 

The 5 components of an axle, their function and installation

If you’re considering replacing an axle in your vehicle, you should first understand what it is. It is the component that transmits electricity from 1 part to another. Unlike a fixed steering wheel, the axles are movable. The following article will discuss the 5 components of the half shaft, their function and installation. Hopefully you were able to identify the correct axle for your vehicle. Here are some common problems you may encounter along the way.
Driveshaft

five components

The 5 components of the shaft are flange, bearing surface, spline teeth, spline pitch and pressure angle. The higher the number of splines, the stronger the shaft. The maximum stress that the shaft can withstand increases with the number of spline teeth and spline pitch. The diameter of the shaft times the cube of the pressure angle and spline pitch determines the maximum stress the shaft can withstand. For extreme load applications, use axles made from SAE 4340 and SAE 1550 materials. In addition to these 2 criteria, spline rolling produces a finer grain structure in the material. Cutting the splines reduces the strength of the shaft by 30% and increases stress.
The asymmetric length of the shaft implies different torsional stiffness. A longer shaft, usually the driver’s side, can handle more twist angles before breaking. When the long axis is intact, the short axis usually fails, but this does not always happen. Some vehicles have short axles that permanently break, causing the same failure rate for both. It would be ideal if both shafts were the same length, they would share the same load.
In addition to the spline pitch, the diameter of the shaft spline is another important factor. The small diameter of a spline is the radius at which it resists twisting. Therefore, the splines must be able to absorb shock loads and shocks while returning to their original shape. To achieve these goals, the spline pitch should be 30 teeth or less, which is standard on Chrysler 8.75-inch and GM 12-bolt axles. However, a Ford 8.8-inch axle may have 28 or 31 tooth splines.
In addition to the CV joints, the axles also include CV joints, which are located on each end of the axle. ACV joints, also known as CV joints, use a special type of bearing called a pinion. This is a nut that meshes with the side gear to ensure proper shaft alignment. If you notice a discrepancy, take your car to a shop and have it repaired immediately.

Function

Axles play several important roles in a vehicle. It transfers power from the transmission to the rear differential gearbox and the wheels. The shaft is usually made of steel with cardan joints at both ends. Shaft Shafts can be stationary or rotating. They are all creatures that can transmit electricity and loads. Here are some of their functions. Read on to learn more about axles. Some of their most important features are listed below.
The rear axle supports the weight of the vehicle and is connected to the front axle through the axle. The rear axle is suspended from the body, frame and axle housing, usually spring loaded, to cushion the vehicle. The driveshaft, also called the propshaft, is located between the rear wheels and the differential. It transfers power from the differential to the drive wheels.
The shaft is made of mild steel or alloy steel. The latter is stronger, more corrosion-resistant and suitable for special environments. Forged for large diameter shafts. The cross section of the shaft is circular. While they don’t transmit torque, they do transmit bending moment. This allows the drive train to rotate. If you’re looking for new axles, it’s worth learning more about how they work.
The shaft consists of 3 distinct parts: the main shaft and the hub. The front axle assembly has a main shaft, while the rear axle is fully floating. Axles are usually made of chrome molybdenum steel. The alloy’s chromium content helps the axle maintain its tensile strength even under extreme conditions. These parts are welded into the axle housing.
Driveshaft

Material

The material used to make the axle depends on the purpose of the vehicle. For example, overload shafts are usually made of SAE 4340 or 1550 steel. These steels are high strength low alloy alloys that are resistant to bending and buckling. Chromium alloys, for example, are made from steel and have chromium and molybdenum added to increase their toughness and durability.
The major diameter of the shaft is measured at the tip of the spline teeth, while the minor diameter is measured at the bottom of the groove between the teeth. These 2 diameters must match, otherwise the half shaft will not work properly. It is important to understand that the brittleness of the material should not exceed what is required to withstand normal torque and twisting, otherwise it will become unstable. The material used to make the axles should be strong enough to carry the weight of a heavy truck, but must also be able to withstand torque while still being malleable.
Typically, the shaft is case hardened using an induction process. Heat is applied to the surface of the steel to form martensite and austenite. The shell-core interface transitions from compression to tension, and the peak stress level depends on the process variables used, including heating time, residence time, and hardenability of the steel. Some common materials used for axles are listed below. If you’re not sure which material is best for your axle, consider the following guide.
The axle is the main component of the axle and transmits the transmission motion to the wheels. In addition, they regulate the drive between the rear hub and the differential sun gear. The axle is supported by axle bearings and guided to the path the wheels need to follow. Therefore, they require proper materials, processing techniques and thorough inspection methods to ensure lasting performance. You can start by selecting the material for the shaft.
Choosing the right alloy for the axle is critical. You will want to find an alloy with a low carbon content so it can harden to the desired level. This is an important consideration because the hardenability of the alloy is important to the durability and fatigue life of the axle. By choosing the right alloy, you will be able to minimize these problems and improve the performance of your axle. If you have no other choice, you can always choose an alloy with a higher carbon content, but it will cost you more money.
Driveshaft

Install

The process of installing a new shaft is simple. Just loosen the axle nut and remove the set bolt. You may need to tap a few times to get a good seal. After installation, check the shaft at the points marked “A” and “D” to make sure it is in the correct position. Then, press the “F” points on the shaft flange until the points are within 0.002″ of the runout.
Before attempting to install the shaft, check the bearings to make sure they are aligned. Some bearings may have backlash. To determine the amount of differential clearance, use a screwdriver or clamp lever to check. Unless it’s caused by a loose differential case hub, there shouldn’t be any play in the axle bearings. You may need to replace the differential case if the axles are not mounted tightly. Thread adjusters are an option for adjusting drive gear runout. Make sure the dial indicator is mounted on the lead stud and loaded so that the plunger is at right angles to the drive gear.
To install the axle, lift the vehicle with a jack or crane. The safety bracket should be installed under the frame rails. If the vehicle is on a jack, the rear axle should be in the rebound position to ensure working clearance. Label the drive shaft assemblies and reinstall them in their original positions. Once everything is back in place, use a 2-jaw puller to pry the yoke and flange off the shaft.
If you’ve never installed a half shaft before, be sure to read these simple steps to get it right. First, check the bearing surfaces to make sure they are clean and undamaged. Replace them if they look battered or dented. Next, remove the seal attached to the bushing hole. Make sure the shaft is installed correctly and the bearing surfaces are level. After completing the installation process, you may need to replace the bearing seals.

China Standard 6 Cavity Servo Drive Automatic Juice Production Line Use Pet Bottle Making Blow Moulding Machines with Best SalesChina Standard 6 Cavity Servo Drive Automatic Juice Production Line Use Pet Bottle Making Blow Moulding Machines with Best Sales

China manufacturer Xy Gantry Type Ball Screw Drive Linear Motion Module for Automation Machines with Good quality

Product Description

XY Gantry type ball screw drive linear motion module for automation machines
 

Product description:

  Linear module is also known as linear CZPT rail, rectangular coordinate robot, linear slide table, etc, which is composed of linear CZPT rail, ball screw, belt,gear and rack and other linear transmission mechanism of automation unit. The linear and curved motion of the load can be assembled through the combination of single or multiple units, which makes the automation equipment more flexible, more convenient in design and more accurate in positioning.
 

Product name linear module Product model TMH6S
Product type Semi-sealed ball screw drive Repeatability Accuracy ±0.01
Screw Lead 2/5/10/20mm Speed range 16/41/83/166mm/s
Maximum Payload Horizontal 30kg;Vertical 15kg Rated thrust 1225/490/245/85N
Stroke range 100-800mm Maximum Static Torque 0.39N.m
Ball screw C7¢12mm Linear guide W42*H9.5mm
Couping 7*6.35mm Drive Motor Servo Motor
Motor Position Exposed/Lower Side/Right Side/Left Side Sensor Inside/Outside/No Sensor
Linear Module Installation Way Horizontal/Vertical/Wall Installation Warranty 12 Monthes
Delivery Time 10-25 Days, According to Quantity OEM/drawing/solution Available
Product advantage High precision, heavy load, more stable, qualified raw material, low cost, short lead time, quick assemble&disassemble, easy maintenance
Application equipment Car polisher machine, metal polishing machine, medical equipment, textile machine, food grabbing machine, laser cutting machine, 3D printing device, labeling machine, assembly equipment, welding euipment, testing equipment, carrying machine, all the automation equipment .

Product pictures: 

Product detailes:

Range of application:

 It can be used in combination with single or multiple axes. It is easy to match the required workpieces in various industries and it becomes a simple and practical mechanical arm. It is mainly used in dustfree workshops or special fields such as electronics and medical equipment, such as film, Depreciation, IC printing, CCD on-line inspection, precise positioning detection of soldering automation equipment, laser plus(laser cutting/laser marking/laser engraving/laser drilling,etc.) precision assembly, precision machine tools, semiconductor production equipment, location detection, electronic production equipment , and 3D printing equipment and other fields.

Production and testing:

Packing and shipping:

1. For Sample or small order, less than 45kg, we suggest to ship by express. (door to door, convenient) 

2. For small order or big order, between 45-200kg, we suggest to ship by air. (fastest and safest,but a little expensive)

3. For big order, more than 200kg, we suggest to ship by sea. (cheapest, but long time)

Our  Factory:

 ZheJiang CZPT Precision Technology Co., Ltd. (called “Tiayo”) located in HangZhou, ZheJiang , nearby HangZhou HangZhou International Airport where runs the second maglev train in China. Tiayo is a China-based company, established in 2007, specializing in R&D, production, marketing, project consultancy of linear actuators and motors, mainly serve the automation industry. 

 For over 10 years, we focus on providing high quality products, excellent after sales service and full solutions of automation machine. Our well-quipped facilities, excellent quality control system gained good reputation of overseas and domestic clients.

 As for now, our linear actuators have been widely used in PC, LCD, PCB, LED, PDP, biotechnology, semiconductor, automotive, optical, food, medical, energy and related industries.

 Tiayo will initiate the second phase of our development strategy, “reasonable price, efficient production time and lifelong time after sales service” is our tenet. We desire to meet more professional business partners to make industrial automation better together.

Our Exhibition:

Tiayo aims to be linear transmission,pneumatic components & vacuum components provider,meanwile we are a linear module manufacturer. We hope to provide a full solution for automation industry to make powerful future. 

Our Service:

1. Our products use high-quality materials and adopt mature processing methods.
2. The products of each series are very rich. If you don’t see them on the page, please contact customer service.
3. Our products provides 1 year warranty. 
4. We can accept customized processing only if you provide drawings.
5. Our quotation is ex-factory unit price. Freight needs to be borne by you. Please consult the freight.
6. Under normal circumstances, the goods will be delivered within 20 days.
7. Our company always listens to your suggestions, if your opinions are favorable.

FAQ:

1. Q: Your products looks nice, can I get a full product catalog with specification for study?
    A: Yes, pls contact our TIAYO sales team.

2. Q: Can you tell me what is your company main business?
    A: Our factory mainly manufacture linear modules/actuators/motors, OEM is available .

3. Q: Which famous enterprise use your machines?
    A: There are BYD,Foxconn, LENS Technology, HUAWEI/Apple/OPPO/Vivo, etc. supply       chain manufacturers are our key account .                                              

4. Q: If so, is it possible get sample machines before trial order?
     A: Yes, pls tell your detailed requirements to TIAYO sales team, we can modify the 3D drawing, prepare 1 or pair of customized sample for you .
   
5. Q: Good, how long is your lead-time?
    A: 7 working days for sample prepare, 15-20 working days for bulk order(Confirm each bill of international payment need extra 3 working days)

6. Q: Sounds good, how long is the warranty period of your machines?
    A: 12-monthes warranty is provided for our linear modules/actuators/motors, strictly based on sales contract.

7. Q: Wow, I want to do business with your company, what kind of payment terms should I use ?
    A: Sample order, trial order, repeat order, we accept T/T payment, 30% deposit pay in advance, 70% balance pay before transportation.(L/C payment only available for designated countries’client)

8. Q: What is the best shipment way for your products?
    A: For samples, the best delivery way is via airplane transport(or land transport),takes 1 week transfer to destination airport, for large quantity, the best shipping way is via CZPT ship(or land transport), takes 1 month to destination port. The nearest sea port is HangZhou/HangZhou.

9. Q: Why choose us?
    A: With more than 10 years experience of linear modules .

Different parts of the drive shaft

The driveshaft is the flexible rod that transmits torque between the transmission and the differential. The term drive shaft may also refer to a cardan shaft, a transmission shaft or a propeller shaft. Parts of the drive shaft are varied and include:
The driveshaft is a flexible rod that transmits torque from the transmission to the differential

When the driveshaft in your car starts to fail, you should seek professional help as soon as possible to fix the problem. A damaged driveshaft can often be heard. This noise sounds like “tak tak” and is usually more pronounced during sharp turns. However, if you can’t hear the noise while driving, you can check the condition of the car yourself.
The drive shaft is an important part of the automobile transmission system. It transfers torque from the transmission to the differential, which then transfers it to the wheels. The system is complex, but still critical to the proper functioning of the car. It is the flexible rod that connects all other parts of the drivetrain. The driveshaft is the most important part of the drivetrain, and understanding its function will make it easier for you to properly maintain your car.
Driveshafts are used in different vehicles, including front-wheel drive, four-wheel drive, and front-engine rear-wheel drive. Drive shafts are also used in motorcycles, locomotives and ships. Common front-engine, rear-wheel drive vehicle configurations are shown below. The type of tube used depends on the size, speed and strength of the drive shaft.
The output shaft is also supported by the output link, which has 2 identical supports. The upper part of the drive module supports a large tapered roller bearing, while the opposite flange end is supported by a parallel roller bearing. This ensures that the torque transfer between the differentials is efficient. If you want to learn more about car differentials, read this article.
air-compressor

It is also known as cardan shaft, propeller shaft or drive shaft

A propshaft or propshaft is a mechanical component that transmits rotation or torque from an engine or transmission to the front or rear wheels of a vehicle. Because the axes are not directly connected to each other, it must allow relative motion. Because of its role in propelling the vehicle, it is important to understand the components of the driveshaft. Here are some common types.
Isokinetic Joint: This type of joint guarantees that the output speed is the same as the input speed. To achieve this, it must be mounted back-to-back on a plane that bisects the drive angle. Then mount the 2 gimbal joints back-to-back and adjust their relative positions so that the velocity changes at 1 joint are offset by the other joint.
Driveshaft: The driveshaft is the transverse shaft that transmits power to the front wheels. Driveshaft: The driveshaft connects the rear differential to the transmission. The shaft is part of a drive shaft assembly that includes a drive shaft, a slip joint, and a universal joint. This shaft provides rotational torque to the drive shaft.
Dual Cardan Joints: This type of driveshaft uses 2 cardan joints mounted back-to-back. The center yoke replaces the intermediate shaft. For the duplex universal joint to work properly, the angle between the input shaft and the output shaft must be equal. Once aligned, the 2 axes will operate as CV joints. An improved version of the dual gimbal is the Thompson coupling, which offers slightly more efficiency at the cost of added complexity.
air-compressor

It transmits torque at different angles between driveline components

A vehicle’s driveline consists of various components that transmit power from the engine to the wheels. This includes axles, propshafts, CV joints and differentials. Together, these components transmit torque at different angles between driveline components. A car’s powertrain can only function properly if all its components work in harmony. Without these components, power from the engine would stop at the transmission, which is not the case with a car.
The CV driveshaft design provides smoother operation at higher operating angles and extends differential and transfer case life. The assembly’s central pivot point intersects the joint angle and transmits smooth rotational power and surface speed through the drivetrain. In some cases, the C.V. “U” connector. Drive shafts are not the best choice because the joint angles of the “U” joints are often substantially unequal and can cause torsional vibration.
Driveshafts also have different names, including driveshafts. A car’s driveshaft transfers torque from the transmission to the differential, which is then distributed to other driveline components. A power take-off (PTO) shaft is similar to a prop shaft. They transmit mechanical power to connected components. They are critical to the performance of any car. If any of these components are damaged, the entire drivetrain will not function properly.
A car’s powertrain can be complex and difficult to maintain. Adding vibration to the drivetrain can cause premature wear and shorten overall life. This driveshaft tip focuses on driveshaft assembly, operation, and maintenance, and how to troubleshoot any problems that may arise. Adding proper solutions to pain points can extend the life of the driveshaft. If you’re in the market for a new or used car, be sure to read this article.

it consists of several parts

“It consists of several parts” is 1 of 7 small prints. This word consists of 10 letters and is 1 of the hardest words to say. However, it can be explained simply by comparing it to a cow’s kidney. The cocoa bean has several parts, and the inside of the cocoa bean before bursting has distinct lines. This article will discuss the different parts of the cocoa bean and provide a fun way to learn more about the word.
air-compressor

Replacement is expensive

Replacing a car’s driveshaft can be an expensive affair, and it’s not the only part that needs servicing. A damaged drive shaft can also cause other problems. This is why getting estimates from different repair shops is essential. Often, a simple repair is cheaper than replacing the entire unit. Listed below are some tips for saving money when replacing a driveshaft. Listed below are some of the costs associated with repairs:
First, learn how to determine if your vehicle needs a driveshaft replacement. Damaged driveshaft components can cause intermittent or lack of power. Additionally, improperly installed or assembled driveshaft components can cause problems with the daily operation of the car. Whenever you suspect that your car needs a driveshaft repair, seek professional advice. A professional mechanic will have the knowledge and experience needed to properly solve the problem.
Second, know which parts need servicing. Check the u-joint bushing. They should be free of crumbs and not cracked. Also, check the center support bearing. If this part is damaged, the entire drive shaft needs to be replaced. Finally, know which parts to replace. The maintenance cost of the drive shaft is significantly lower than the maintenance cost. Finally, determine if the repaired driveshaft is suitable for your vehicle.
If you suspect your driveshaft needs service, make an appointment with a repair shop as soon as possible. If you are experiencing vibration and rough riding, driveshaft repairs may be the best way to prevent costly repairs in the future. Also, if your car is experiencing unusual noise and vibration, a driveshaft repair may be a quick and easy solution. If you don’t know how to diagnose a problem with your car, you can take it to a mechanic for an appointment and a quote.

China manufacturer Xy Gantry Type Ball Screw Drive Linear Motion Module for Automation Machines with Good qualityChina manufacturer Xy Gantry Type Ball Screw Drive Linear Motion Module for Automation Machines with Good quality

China best Hydraulic Drive Speed Corrugated Roof Sheet Making Machines with Free Design Custom

Product Description

hydraulic drive speed corrugated roof sheet making machines

Technical parameters:
1 Cutting&Hydraulic type Cut slide/ Double CZPT pillar
2 Hydraulic motor power 3kw-7.5kw
3 Cutting  drive  Decelerating motor + Chain drive  gear all by high-frequency
4 Length measurement Encoder
5 Control System Panasonic /Siemens / Schneider / Delta PLC
6 Chain Size 1inch/2inch
7 Main Frame 300mm/350mm H-Beam or 350mm
8 Backboard Thickness 17mm/200mm
9 Feeding Material Better as your drawing or from our designer
10 Feeding Thickness 0.18mm-0.8mm
11 Effective width Better as your drawing or from our designer
12 Productivity 8-12/min
13 Roll Station 14rows(according to different design)
14 Roller Diameter  70mm/75mm(depend on different design)
15 Roller material 45# steel 
16 Cutter material Cr12 mould steel heat-treated hardness of HRC = 60-62 degrees
17 Overall Size Size of our designer
18 Total Weight  
2t-12t

Products showing

Decoiler—–feeding—– leveling —– cutting —–roll forming —– punching —– output table
 

Packaging & Shipping
1. roll forming machine and uncoiler are nude packing (If you need, we can also packed it with water-proof plastic)
2. PLC control system and motor pump are packed with water proof paper,spare parts in carton box.
3.One set of machine needs a 40′ container to shipping.

Our Services
 
1. Warranty :One year,and we will provide technical support for whole life of the equipment.
2. Delivery time: Within 35 days after deposit receipt your payment
3. Guarantee period: 18months free service/ pay service all the machine life
4. Installation and training
   If buyers visit our factory and check the machine, we will teach you how to install and use the    machine and also train your workers/technician face to face.
 
 
FAQ
 

1.Q:Are you manufacturer?  

A:Yes,we are manufacturer for cold roll forming machine over 12 years.
 

2.Q: if you can accept OEM? Design and manufacture according our photo.

A: Yes, we can accept OEM,we owned expert engineer team, professional design CAD drawings and use famous brand components according your demands.
 

3.Q:What’s the warranty for your machine? 

A: we provide 2years guarantee and provide lifetime technical support.
 

4.Q:How many workers is needed for the machine operation       

A: One worker is enough, the machine use automatic PLC control system.
 

5.Q. Do you have after sales support? 

A: Yes,Our engineer can supply remote-video technical support and online support teach your worker.

6. Q.Can you be responsible for transport?  
A.Yes,we owned expert export team, we can arrangement for you to your destination port or address.

7. Q:What service can you provide before order?
A:About the pre-sale service, We provide professional solutions according your demands,such as design,technical parameter, delivery flow etc. At the same time, we can supply invitation letter for your visit our factory and showing the machine operation for you .
 

8.Q: What is the after- sale service?

A: we will supply lifetime technical support,quick-wear parts within 2years,Also can provide field maintenance and repair service .
 

9.Q:Any other service?

A: We can help you purchase raw material for machine,help you check ship date,update for you ship date etc
 

10.Q:Any certification

A:Yes, we have SGS ISO certification. 

11.Q:How do your machines compare with other big companies in this market?
A:our factory machine only export, quality and standard are conform to world-standard, and we have good manufacture-experience for different country demands.

12.Q:Will you deliver the right goods as ordered? How can I trust you?
A: Yes, of course, reputation is our company’s life, our factory owned alibaba golden-diamond supplier,SGS certificate and CE certificate.
 

13.Q:How to visit your company?

Fly to ZheJiang airport, By high speed train From ZheJiang Nan to HangZhou Xi (1 hour), then we pick up you.

14.Q: How can we be assured that you will deliver us quality machine with spare parts?
A: welcome visit our factory at any time, check all our raw material,worker quality,factory feeling etc.

15. Q:Can you provide some spare parts?
A: Yes, of course. We will loading some quick-wear parts together with the machine.

16.Q: Does 1 machine can only produce 1 style panel profile?
A: Not exactly, we have double or 3 layer machine, 1 machine can produce 2 to 3 profiles.

17. Q:Payment Terms.
A: we can accept TT and TT+LC.

18.Q:What information you need prepare before quote me?
A: best send us your profile and raw material detail, or we can custom-made according your demands.

19.Q: I am new in this field, do not know about the machine and do not know how to operate it.

A .The machine has been installed and tested well before shipping. It is easy to operate.
Normally speaking, our customer follows the instruction book and can operate the machine well.
If you need, we can also send the technician to your factory to fix the machine and train your workers.

20.Q:What is included in the machine?  
A.The whole line includes a manual decoiler, roll forming machine, received goods table and spare parts box.

The whole line includes a manual decoiler, roll forming machine and received goods table. when you get the machine in your factory, you just need to do following 3 things, and then you can start working.

a. Put the machine on the flat level ground.

b. Inject gear oil and hydraulic oil.

c. Connect 3 phase electric wire.(Based on your local use voltage,some use 2phase )

21. I do not know about the machine and do not know how to install it. Can you install the machine in my factory?

If you need us to send engineers to your factory, you will pay for the travel expense such as visa, round tickets, hotel, food Salary of 100 USD per day per person (from departure of our factory, until engineer back to our factory). You also need to take care of his safety.

22.Q:Is the machine automatic?   
A: Yes,it can be manual or automatic

 
Company Information
 
  ZheJiang Xihu (West Lake) Dis. Imp&Exp company are specializing in the production of all kinds of Aluzinc rib roofing sheet roll forming machine,glazed roof making machine, double roof making machine, floor deck machine,curve roof machine,ridge cap roof forming machine, different sizes roofing sheet, PPGI/ GI,Alu-Zinc steel coils ,Galvanized steel coils, Galvanized steel sheet,Galvalume steel coils/sheet, cold/ hot rolled sheet/coils,professional service and favorable price, satisfied with the quality,welcome to every customers come to visit and buy ! 
 

Related machinery

How to tell if your driveshaft needs replacing

What is the cause of the unbalanced drive shaft? Unstable U-joint? Your car may make clicking noises while driving. If you can hear it from both sides, it might be time to hand it over to the mechanic. If you’re not sure, read on to learn more. Fortunately, there are many ways to tell if your driveshaft needs replacing.

unbalanced

An unbalanced driveshaft can be the source of strange noises and vibrations in your vehicle. To fix this problem, you should contact a professional. You can try a number of things to fix it, including welding and adjusting the weight. The following are the most common methods. In addition to the methods above, you can use standardized weights to balance the driveshaft. These standardized weights are attached to the shaft by welders.
An unbalanced drive shaft typically produces lateral vibrations per revolution. This type of vibration is usually caused by a damaged shaft, missing counterweights, or a foreign object stuck on the drive shaft. On the other hand, torsional vibrations occur twice per revolution, and they are caused by shaft phase shifts. Finally, critical speed vibration occurs when the RPM of the drive shaft exceeds its rated capacity. If you suspect a driveshaft problem, check the following:
Manually adjusting the imbalance of a drive shaft is not the easiest task. To avoid the difficulty of manual balancing, you can choose to use standardized weights. These weights are fixed on the outer circumference of the drive shaft. The operator can manually position the weight on the shaft with special tools, or use a robot. However, manual balancers have many disadvantages.
air-compressor

unstable

When the angular velocity of the output shaft is not constant, it is unstable. The angular velocity of the output shaft is 0.004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a problem. But when it’s unstable, the torque applied to it is too much for the machine. It might be a good idea to check the tension on the shaft.
An unstable drive shaft can cause a lot of noise and mechanical vibration. It can lead to premature shaft fatigue failure. CZPT studies the effect of shaft vibration on the rotor bearing system. They investigated the effect of flex coupling misalignment on the vibration of the rotor bearing system. They assume that the vibrational response has 2 components: x and y. However, this approach has limited application in many situations.
Experimental results show that the presence of cracks in the output shaft may mask the unbalanced excitation characteristics. For example, the presence of superharmonic peaks on the spectrum is characteristic of cracks. The presence of cracks in the output shaft masks unbalanced excitation characteristics that cannot be detected in the transient response of the input shaft. Figure 8 shows that the frequency of the rotor increases at critical speed and decreases as the shaft passes the natural frequency.

Unreliable

If you’re having trouble driving your car, chances are you’ve run into an unreliable driveshaft. This type of drivetrain can cause the wheels to stick or not turn at all, and also limit the overall control of the car. Whatever the reason, these issues should be resolved as soon as possible. Here are some symptoms to look for when diagnosing a driveshaft fault. Let’s take a closer look.
The first symptom you may notice is an unreliable drive shaft. You may feel vibrations, or hear noises under the vehicle. Depending on the cause, it could be a broken joint or a broken shaft. The good news is that driveshaft repairs are generally relatively inexpensive and take less time than a complete drivetrain replacement. If you’re not sure what to do, CZPT has a guide to replacing the U-connector.
One of the most common signs of an unreliable driveshaft is clanging and vibration. These sounds can be caused by worn bushings, loose U-joints, or damaged center bearings. This can cause severe vibration and noise. You can also feel these vibrations through the steering wheel or the floor. An unreliable driveshaft is a symptom of a bigger problem.
air-compressor

Unreliable U-joints

A car with an unreliable U-joint on the drive shaft can be dangerous. A bad u-joint can prevent the vehicle from driving properly and may even cause you trouble. Unreliable u-joints are cheap to replace and you should try getting parts from quality manufacturers. Unreliable U-joints can cause the car to vibrate in the chassis or gear lever. This is a sure sign that your car has been neglected in maintenance.
Replacing a U-joint is not a complicated task, but it requires special tools and a lot of elbow grease. If you don’t have the right tools, or you’re unfamiliar with mechanical terminology, it’s best to seek the help of a mechanic. A professional mechanic will be able to accurately assess the problem and propose an appropriate solution. But if you don’t feel confident enough, you can replace your own U-connector by following a few simple steps.
To ensure the vehicle’s driveshaft is not damaged, check the U-joint for wear and lubrication. If the U-joint is worn, the metal parts are likely to rub against each other, causing wear. The sooner a problem is diagnosed, the faster it can be resolved. Also, the longer you wait, the more you lose on repairs.

damaged drive shaft

The driveshaft is the part of the vehicle that connects the wheels. If the driveshaft is damaged, the wheels may stop turning and the vehicle may slow down or stop moving completely. It bears the weight of the car itself as well as the load on the road. So even a slight bend or break in the drive shaft can have dire consequences. Even a piece of loose metal can become a lethal missile if dropped from a vehicle.
If you hear a screeching noise or growl from your vehicle when shifting gears, your driveshaft may be damaged. When this happens, damage to the u-joint and excessive slack in the drive shaft can result. These conditions can further damage the drivetrain, including the front half. You should replace the driveshaft as soon as you notice any symptoms. After replacing the driveshaft, you can start looking for signs of wear.
A knocking sound is a sign of damage to the drive shaft. If you hear this sound while driving, it may be due to worn couplings, damaged propshaft bearings, or damaged U-joints. In some cases, the knocking noise can even be caused by a damaged U-joint. When this happens, you may need to replace the entire driveshaft, requiring a new one.
air-compressor

Maintenance fees

The cost of repairing a driveshaft varies widely, depending on the type and cause of the problem. A new driveshaft costs between $300 and $1,300, including labor. Repairing a damaged driveshaft can cost anywhere from $200 to $300, depending on the time required and the type of parts required. Symptoms of a damaged driveshaft include unresponsiveness, vibration, chassis noise and a stationary car.
The first thing to consider when estimating the cost of repairing a driveshaft is the type of vehicle you have. Some vehicles have more than one, and the parts used to make them may not be compatible with other cars. Even if the same car has 2 driveshafts, the damaged ones will cost more. Fortunately, many auto repair shops offer free quotes to repair damaged driveshafts, but be aware that such work can be complicated and expensive.

China best Hydraulic Drive Speed Corrugated Roof Sheet Making Machines with Free Design CustomChina best Hydraulic Drive Speed Corrugated Roof Sheet Making Machines with Free Design Custom